HIKVISION DS-2DE3304W-DE User Manual page 98

User Manual of Network Mini PTZ Camera
If you select Motion Detection, the video will be recorded when the motion
is detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Step 1 in the Section 7.6.1 Configuring Motion Detection.

Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of Alarm
Input Settings interface. For detailed information, please refer to Section
7.6.3 Configuring External Alarm Input.

Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 7.6.1 and Section 7.6.3 for detailed information.

Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 7.6.1 and Section 7.6.3 for detailed information.

Record Triggered by Line Crossing Detection
If you select Line Crossing Detection, the video will be recorded when the
line crossing detection is triggered.
Besides configuring the recording schedule, you have to configure the
settings on the Line Crossing Detection interface. Please refer to Section
7.6.9 for detailed information.
 Record Triggered by Intrusion Detection
If you select Intrusion Detection, the video will be recorded when an
intrusion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Intrusion Detection interface. Please refer to Section 7.6.8
for detailed information.

Record Triggered by Audio Exception Detection
If you select Audio Exception Detection, the video will be recorded when
the audio exception is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Audio Exception Detection interface. Please refer to Section
7.6.6 for detailed information.

Record Triggered by All Events
© Hikvision
97