Configuring Osd Settings - HIKVISION DS-2DE3304W-DE User Manual

User Manual of Network Mini PTZ Camera
You can set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video
system in your country.
This function varies depending on the models of PTZ camera.
Other
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 3, 6, 12, 24 and 48.
This function varies depending on the models of PTZ camera.

7.5.2 Configuring OSD Settings

Purpose:
The PTZ camera supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of PTZ camera.
Steps:
1. Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings
2. Check the corresponding checkbox to select the display of PTZ camera name,
© Hikvision
Figure 7-35 OSD Settings
75