HIKVISION DS-2DE3304W-DE User Manual page 96

User Manual of Network Mini PTZ Camera
2. Check the checkbox of Enable Record Schedule to enable scheduled recording.
3. Set the record parameters of the PTZ camera.
 Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the PTZ camera starts to record at
9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
25 s, 30 s or not limited.
The pre-record time changes according to the video bitrate.
 Post-record: The time you set to stop recording after the scheduled time or
the event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the PTZ camera records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.
© Hikvision
Figure 8-7 Recording Schedule Interface
Figure 8-8 Record Parameters
95