MULTIQUIP G3200105 Operation And Parts Manual page 22

FILTER REPLACEMENT
1. Remove the balloon as described in the STORAGE
section.
2. Turn the balloon/lamp assembly upsidedown to access
the filter. See Figure 27.
AIR PLATE
Figure 27. Accessing Filter
3. Turn the three locking tabs outwards to release the air
plate. See Figure 27.
4. Remove the air plate and filter. See Figure 28.
AIR PLATE
Figure 28. Filter Removal
5. Install a new filter and reinstall the air plate.
GB3LED/B LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/09/15) — PAGE 23
LOCKING
TAB
FILTER
MAINTENANCE
6. Turn the three locking tabs inwards to lock the air plate
in place. See Figure 29.
Figure 29. Locking Air Plate
LOCK TAB