Purpose Of This Manual - Greenlee NETcat NC-500 Instruction Manual

Description
®
The NETcat Pro wiring tester is a device that verifies twisted pair and coaxial cables. It
uses TDR technology to measure distance to fault and lengths of cable. It also has a
feature that enables detection of an active network device partner (PC/HUB).
Additional features include the following:
• Employs touch panel LCD with contrast adjustment and backlight.
• Tests shielded twisted pair (STP), unshielded twisted pair (UTP), and coaxial cables.
• Measures cable length using TDR technology.
• Generates four different tones for cable tracing purpose.
• Identifies active network device (PC/HUB) on 10/100 BaseT networks displaying
device capabilities.
• Verifies wiremaps.
• Detects shorts, opens, reversed polarity, crossed pairs, and split pairs.
• Uses remote ID units for Office Identification.
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This
instruction manual and any markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this tool. Observe all of the safety
information provided.

Purpose of This Manual

This instruction manual is intended to familiarize all personnel with the safe operation
®
and maintenance procedures for the Greenlee NC-500 NETcat Pro. Keep this manual
available to all personnel. Replacement manuals are available upon request at no
charge.
2