Greenlee NETcat NC-500 Instruction Manual page 11

Test Details (cont'd)
Wiremap
This test checks the cable for correct wiring when a remote/Office ID is connected to
the end of the cable under test. The cable configuration is tested for shield continuity (if
fitted), opens, shorts, reversed pairs, crossed pairs, and split pairs. Below are examples
of detectable faults along with a good wiremap.
Good wiremap.
Wiremap with a split pair
on 1-2 and 7-8 and shield
disconnected.
Wiremap with an open at
10 ft on pair 1-2 and
shield disconnected.
Wiremap with a reversed
pair on 1-2 and shield
disconnected.
NC-500 NETcat
Wiremap with a short at
11 ft on pair 1-2 and
shield disconnected.
Wiremap with a crossed
pair on 1-2 and 4-5 and
shield disconnected.
®
Pro
11