Display Icons - Greenlee IPM-300 Instruction Manual

Display Icons

11. CAL
12. SOURCE READ Source or Read function is selected
13. SETUP
14. BAT
15. HI
16. MAX
17. –
18. MIN
19. LOW
20. - 8.8.8.8.8
21. CONTINUITY
22.
23. POLARITY
24. %
25. 2-WIRE SIM
26. RTD TYPE
27. T/C TYPE
28. PWR XMTR
29. mA
30. m
31. V
32. AC
33. DC
8
Automatic self calibration in progress
Reset of defaults selected
Low Battery
High value is selected in Source mode
Maximum value is displayed in Read mode
Polarity Indicator
Minimum value is displayed in Read mode
Low value is selected in Source mode
Output or input value (numeric display)
Over range (the signal is too high for the range)
Under range (the signal is too low for the range)
Continuity function selected
Continuity indicator
Reversed polarity detected
Display is in percent of 4 mA to 20 mA
2-wire simulator function is selected
RTD type (Pt or Cu) is displayed on #41
Thermocouple type (J, T, E, or K) is displayed on #41
Power transmitter function is selected
Milliamp
Milli (10 -3 )
Volts
AC
DC