Combining Tracks (Combine) - Sony WALKMAN MZ-NF520 Operating Instructions Manual

To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder (press
P MODE/ on the remote control) at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 29).
Combining tracks
(combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
Notes
• You cannot erase a track mark on a track that
has been checked-out from your computer.
• To combine groups or tracks in a disc with
group settings, see page 45.
• You cannot combine tracks recorded in
different recording mode.
40
The track numbers will change as follows:
1 2
Erase a track mark
1 2
Track numbers decrease
5-way control key (.)
1
While playing the track with the track
mark you want to erase, press X to
pause.
2
Find the track mark by pressing
..
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
"MARK" appears in the display for a
few seconds.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
3 4
3
X
T MARK