Sony WALKMAN MZ-NF520 Operating Instructions Manual page 37

4
Press . or > repeatedly until
the following item appears in the
display, and then press ENTER.
When labeling a
track
When labeling a
disc
The cursor flashes in the letter input
area and the track, group, or disc is
ready to be labeled.
The cursor flashes.
5
Press VOL + or – to select a letter and
press ENTER.
The selected letter appears and the
cursor moves to the next input
position.
The buttons used for character input
and their functions are listed below.
Functions
To select a
character
To enter a letter
To enter a name
To insert a blank
space before the
cursor
To delete a letter
To switch capital
and small letters.
To cancel
labeling.
" : Name"
" : Name"
Operations
Press VOL + or .
–
Press ENTER.
Press ENTER for 2
seconds or more.
Press END
SEARCH and press
VOL + at the same
time.
Press END
SEARCH and press
VOL – at the same
time.
Press X.
Press x or MENU.
6
Repeat step 5, and then enter all
characters of the label name.
7
Press ENTER for 2 seconds or more
A track or disc is labeled.
To return the preceding
setting
Press x.
To cancel labeling
Press x for 2 seconds or more.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input at that point is entered
automatically.
Re-labeling recordings
Follow the procedure of the "Labeling"
(page 36) to relabel a name.
Note
The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
For the remote control operations,
see page 58.
.
37