Datalogic Adc Limited Factory Warranty; Warranty Coverage; Warranty Claims Process - Datalogic QuickScan QM21 1 Series Quick Reference Manual

Base Station Indications

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic warrants to Customer that Datalogic' s products will
be free from defects in materials and workmanship for a
period of three years from product shipment. Datalogic ADC
("Datalogic") hardware products are warranted against
defects in material and workmanship under normal and
proper use. The liability of Datalogic under this warranty is
limited to furnishing the labor and parts necessary to remedy
any defect covered by this warranty and restore the product
to its normal operating condition. Repair or replacement of
product during the warranty does not extend the original war-
ranty term. Products are sold on the basis of specifications
applicable at the time of manufacture and Datalogic has no
obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material
or workmanship, Datalogic shall, at its sole option repair or
replace the product without additional charge for parts and
labor, or credit or refund the defective products duly returned
to Datalogic. To perform repairs, Datalogic may use new or
reconditioned parts, components, subassemblies or products
that have been tested as meeting applicable specifications for
equivalent new material and products. Customer will allow
Datalogic to scrap all parts removed from the repaired prod-
uct. The warranty period shall extend from the date of ship-
ment from Datalogic for the duration published by Datalogic
for the product at the time of purchase (Warranty period).
Datalogic warrants repaired hardware devices against defects
in workmanship and materials on the repaired assembly for a
90 day period starting from the date of shipment of the
repaired product from Datalogic or until the expiration of the
original warranty period, whichever is longer. Datalogic does
not guarantee, and it is not responsible for, the maintenance
of, damage to, or loss of configurations, data, and applications
on the repaired units and at its sole discretion can return the
units in the "factory default" configuration or with any soft-
ware or firmware update available at the time of the repair
(other than the firmware or software installed during the
manufacture of the product). Customer accepts responsibility
to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Cus-
tomer must notify Datalogic of the claimed defect before the
expiration of the applicable Warranty period and obtain from
Quick Reference Guide 33