Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1
Status Indicator
2
Alert Indicator
3
Power Button
4
LAN Indicator
5
Drive Status Indicator
6
Drive Tray
7
Drive Tray Lock
8
Power Port
9
Fan
PCI Express Expansion
10
Slot
11
USB 3.0 Port
12
Expansion Port
13
Console Port
14
RESET Button
15
LAN Port
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Displays warnings regarding fan or temperature. For more information, see
"Appendix B: LED Indicator Table".
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
Front Panel
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
Displays the status of the installed drive. For more information, see "Appendix
B: LED Indicator Table".
Install drives (hard disk drives or solid state drives) here.
Lock or unlock drive trays.
Connect the AC power cord here.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Supports a PCIe x8 network interface card.
Connect external drives or other USB devices to the DiskStation here.
Connect Synology Expansion Unit
Back Panel
This port is used for manufacturing use only.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and password for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again
until you hear three beep sounds to return the DiskStation to "Not installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Connect network cables here.
Description
1
to the DiskStation here.
Advertisement
Table of Contents
