Menu Options - Chauvet Q-Wash 260-LED Quick Reference Manual

Q-Wash 260-LED QRG

Menu Options

st
1 Level
INTRO
INVERT
RANGE
SPECIAL
EDIT
1st Level
EDIT (Cont.)
EXTRA
Programming Levels
ADDRESS 001~512 Selects a starting DMX address
Resets the product's custom settings
RESET NO/YES
HIGH Select the fan's operation mode.
NORMAL NOTE: Fixture's controller will force the fan to High if the
FANS
LOW product's internal temperature becomes too high, despite any
AUTO manual or DMX setting
DMX512 Selects DMX running mode
AUTO1 Selects the first automatic program
AUTO2 Selects the second automatic program
Selects the user customizable program
CUSTOM
RUN
Selects the first sound program
SOUND1
SOUND2 Selects the second sound program
SLAVE Selects the Slave running mode
TEST Starts the product's test sequence
Selects the 9-channel DMX mode
BASIC
CHANNELS
Selects the 12-channel DMX mode
ADVANCED
60 CLOSE Turns off the display after 60 seconds
DISPLAY
BRIGHT Keeps the display on
KEYLOCK NO/YES Activates/deactivates the control panel password
Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 4~1
DIMMER
Linear dimmer
DIMMER 0
INFO EDITION Shows the version of the installed S/W
PAN Defines the pan direction
NORMAL/
TILT Defines the tilt direction
REVERSE
Defines the direction of the dimmer fader
DIMMER
USE Activates the changes
NO/YES
P/START Sets the pan start point (restricted range)
P/FINISH Sets the pan end point (restricted range)
T/START 000~255 Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
T/FINISH
USE Activates the changes
BLACKD Activates the move-in black delay (3 s)
NO/YES
DMX The DMX controller can reset the product
RESET
SYSTEM The control panel can reset the product
LEDs illuminate at normal or high intensity
NORMAL/
POWER NOTE: The product will return to Normal if the internal
HIGH
temperature becomes too high
White output matches that of older products
UC
COLOR White output set by RGB-W
RGBTOW
OFF White output defined by RGBW faders
DMX The DMX controller can set the fan speed
FAN
SYSTEM The control panel can reset the fan speed
In case of lost DMX signal, the product will remain in its current
SAVE
state
DMXERROR
In case of lost DMX signal, the product will blackout
BLAK
STEP Selects the program step
PAN Selects the pan position
000~255
TILT Selects the tilt position
Selects the pan/tilt speed
SPEED
Programming Levels
RED
GREEN Combines red, green, blue, and white to obtain a custom color
BLUE
DIMMER 000~255 Selects the dimmer value
STROBE Selects the strobe frequency and mode
DIMSPEED Selects the dimmer speed
TIME Selects the step duration
Activates the changes
USE NO/YES
Opens the Extra menu (see below)
PASSWORD ****
Page 6 of 10
Description
Description