Connecting Video Source Devices - Canon LV-WX320 User Manual

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following
output sockets:
• HDMI
• Component Video
• S-Video
• Video (composite)
You need only connect the projector to a Video source device using just one of the above connecting
methods, however each provides a different level of video quality. The method you choose will most
likely depend upon the availability of matching terminals on both the projector and the Video source
device as described below:
HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between
compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure
digital viewing experience. See
projector to an HDMI device.
Digital TV tuner and DVD players output Component Video natively, so if available on your devices, this
should be your connection method of choice in preference to (composite) Video. See
Component Video source device" on page 27
device.
If you have both composite Video and S-Video output terminals on your Video source device, you should
elect to use the S-Video option. See
connect the projector to an S-Video device.
If you have only composite Video output terminals on your Video source device, connect to Composite
Video input. See
projector to a composite Video device.
"Connecting an HDMI device" on page 26
"Connecting an S-Video source device" on page 28
"Connecting a composite Video source device" on page 29
for how to connect the projector to a component video
for how to connect the
"Connecting a
for how to
for how to connect the
25