Table of Contents
Advertisement
Remote control: LV-RC08
1
2
3
4
5
6
7
1.
POWER (ON/STANDBY)
I
I
Toggles the projector between standby mode and
on. See
"Starting up the projector" on page 30
"Shutting down the projector" on page 44
details.
2.
INPUT
Displays the source selection bar. See
input signal" on page 34
3.
Left
Selects the desired menu items and makes
adjustments. See
details.
4.
BLANK
Used to hide the screen picture. See
image" on page 43
5.
TIMER
Activates or adjusts some basic settings of an on-
screen timer. See
42
for details.
6.
D.ZOOM (+, -)
Magnifies or reduces the projected picture size.
See
"Magnifying and searching for details" on
page 37
for details.
7.
MUTE
Temporarily mutes the audio. See
sound" on page 44
8.
MENU
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings. See
for details.
16
8
9
10
11
12
13
9
14
"Switching
for details.
"Using the menus" on page 31
"Hiding the
for details.
"Using the TIMER key" on page
"Adjusting the
for details.
"Using the menus" on page 31
9.
Keystone/Arrow keys (
Manually corrects distorted images resulting from
an angled projection. See
page 36
10. AUTO PC
Automatically determines the best picture timings
for the displayed image. See
image" on page 35
11.
Right/
Activates panel key lock. See
keys" on page 43
When the On-Screen Display (OSD) menu is
activated, the #3, #9 and #11 keys are used as
directional arrows to select the desired menu items
and to make adjustments. See
on page 31
12. FREEZE
Freezes the projected image. See
and
image" on page 43
for
13. OK/IMAGE
Enacts the selected On-Screen Display (OSD)
menu item.
Selects an available picture setup mode. See
"Selecting a image mode" on page 39
14. VOLUME keys (+, -)
Adjusts the sound level. See
for
on page 44
When you are under the MHL connection
mode and the projector OSD is off, these
buttons are available for controlling your
smart device: arrow keys, OK/IMAGE,
AUTO PC.
3, 9 and 11: arrows keys
Arrows keys are available for controlling your
smart device.
10. AUTO PC
Use the key to return or exit the OSD menu of
your smart device.
13. OK/IMAGE
Use the key to confirm the selection on the
OSD of your smart device.
To enter the MHL connection mode, connect a
MHL device (See
compatible smart device" on page 26
details.) and switch the input signal to HDMI/
MHL (See
for details.).
Attention of the MHL device connection (See
"Connecting a MHL-compatible smart device"
on page 26
/ Up,
"Correcting keystone" on
for details.
"Auto-adjusting the
for details.
"Locking control
for details.
"Using the menus"
for details.
for details.
"Adjusting the sound"
for details.
"Connecting a MHL-
"Switching input signal" on page 34
for details.)
/ Down)
"Freezing the
for details.
for
Advertisement
Table of Contents
