Lincoln Electric POWERTEC i320C STANDARD Operator's Manual page 16

Figure 12.

Use the Right Knob [36] to highlight the program
number.

Press the Right Knob [36] to confirm the selection.
WARNING
The Lists of available programs depends on the power
source.
If a user does not know the Welding Program Number, it can be
searched. In that case in subsequent steps are given:
 The Welding
Process
 The Electrode
Wire Type
 The Electrode
Wire Diameter
 The Shielding
Gas
English
Support
To access the Support Menu:

Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon
"Support".

Press the Right Knob [36] to confirm the selection.
The Support Menu enables to get knowledge of the
following points:
 Accessories:
- Rolls for aluminum wire
- Rolls for fluxed cored wire
- Rolls for steel/stainless steel wire
- TIG torches
- Electrode & Ground cable
- MIG/MAG LINC GUN Standard
 Tips and Tricks:
- Tutorial
- Welding variables effect MIG
User Setup
To access the User Setup:

Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon
"Settings".

Press the Right Knob [36] to confirm the selection.
The User Setting Menu enables to add the additional
function and / or parameters to the Welding Parameters
Bar [44]:
14
Figure 13.
English