Gear (Stocker 3); Rotary Encoder (Md) (S771) - Sony HCD-HDX275 Service Manual

HCD-HDX275/HDX277WC/HDX279W/HDX475/HDX576WF/HDX675

3-18. GEAR (STOCKER 3)

step tapping screw
(PTPWH M2.6)
gear (stocker 3)

3-19. ROTARY ENCODER (MD) (S771)

PRECAUTION DURING ROTARY ENCODER (MD) INSTALLATION
Slide the cam (BU) in the direction of the arrow so that the mark
of the gear (BU1) can be seen. Engage the gears while aligning
the mark of the gear (BU1) with the protruding part of the
rotary encoder.
rotary encoder (MD)
mark
cam (BU) gear (BU1)
protruding part
PRECAUTION DURING GEAR (STOCKER 3) INSTALLATION
Be sure to align the rib of the gear (stocker 3) with the groove
of the rotary encoder.
groove
rotary encoder
(ST U/D encoder)
three screws
(BTTP M2.6)
bracket (encoder)
Remove the five solders.
two claws
rotary encoder (MD)
(S771)
step tapping screw
(2 × 6 PWH)
– CD mechanism deck bottom view –
rib
gear (stocker 3)
(reverse-side)
21