Gear (Stocker 3); Rotary Encoder (Md) - Sony HCD-DX155 Service Manual

HCD-DX155/DX255

3-18. GEAR (STOCKER 3)

1 screw
(+PTPWH 2.6 × 8)
2 gear (stocker 3)

3-19. ROTARY ENCODER (MD)

PRECAUTION DURING ROTARY ENCODER (MD) INSTALLATION
Slide the cam (BU) in the direction of the arrow so that the mark
of the gear (BU1) can be seen. Engage the gears while aligning
the mark of the gear (BU1) with the protruding part of the
rotary encoder.
rotary encoder (MD)
mark
cam (BU)
22
protruding part
gear (BU1)
PRECAUTION DURING GEAR (STOCKER 3) INSTALLATION
Be sure to align the rib of the gear (stocker 3) with the groove
of the rotary encoder.
groove
rotary encoder
(ST U/D encoder)
1 three screws
(+BTTP 2.6)
2 rotary encoder (MD)
rib
gear (stocker 3)
(reverse-side)