Initial Start-Up; Operation - HSM HSM1785 Operating Instructions Manual

Cross-cut high-security shredder
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11

4 Initial start-up

WARNING
Dangerous mains
voltage!
Improper handling of the machine can lead
to an electric shock.
– Only use the machine in a dry room
indoors. Never operate the machine in
damp rooms or in the rain.
– Keep the machine, the plug and cable
away from open fi re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
– Make sure that the power plug is easily
accessible.
– Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate.
• Connect the power plug of the machine
into a properly installed socket.
12

5 Operation

Switching on the shredder
• Set mains switch at rear of paper shredder
to "I".
• Press the operation button.
 The "Ready for operation" indicator
lights up
Shredding paper
• Feed the paper into the centre of the pa-
per slot. The light barrier starts the cutting
unit automatically. Therefore, with thin
paper strips, make sure the light barrier
detects them.
 Two seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and
the shredder switches to standby.
SECURIO B 24
english
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes it
easier to access the
feed opening.
05/2016

Advertisement

Table of Contents
loading

This manual is also suitable for:

Securio b24

Table of Contents