Explanation Of Symbols And Signal Words; Liability - LOGICDATA DMD500 Manual

EXPLANATION OF SYMBOLS AND SIGNAL WORDS

Safety Notices contain both symbols and signal words. The signal word indicates the severity of the hazard.
Indicates a hazardous situation which, if not avoided, will result in death or serious
DANGER
injury.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moder-
CAUTION
ate injury.
Indicates a situation which, if not avoided, could result in damage to the product
NOTICE
through electrostatic discharge (ESD).
Indicates a situation that will not lead to personal injury, but could lead to damage to
NOTICE
the device or the environment.
Indicates the protection class of the device: Protection Class III.
INFO
Protection Class III devices may only be connected to SELV or PELV power sources.
Indicates important tips for handling the product.
INFO

2.5 LIABILITY

LOGICDATA products comply with all currently applicable health and safety regulations. However, risk can
result from incorrect operation or misuse. LOGICDATA is not liable for damage or injury caused by:
• Improper product use
• Disregard of the documentation
• Unauthorized product alterations
• Improper work on and with the product
• Operation of damaged products
• Wear parts
• Improperly performed repairs
• Unauthorized changes to the operating parameters
• Disasters, external influence, and force majeure
The information in this Operating Manual describes the characteristics of the product without assurances.
Resellers assume responsibility for the LOGICDATA products installed in their applications. They must en-
DMD500 - OPERATING MANUAL // PAGE 7