Whale INSTANT MATCH SDS263T Installation Manuallines page 13

2. Transformer set up
• Switch the mains electric supply to the transformer
ON and wait to hear the audible beep from the transformer.
The light on the transformer will now flash red to indicate
®
that a Bluetooth connection has not yet been established
• Press and hold the blue test button on the transformer until
the the light flashes red and green to indicate that the
transformer is now in pairing mode.
NOTE: You now have 120 seconds to pair the
transformer to the shower.
3. Configuring the shower
• Turn on power to the shower using the pull cord.
• This will automatically pair the shower and pump.
13