Whale INSTANT MATCH SDS263T Installation Manuallines page 10

5. Wiring your transformer
• Connect mains wire to a 5A fused spur.
• The transformer is factory set as shown to the right on
the jumper settings for Bluetooth
10 seconds overrun and 15mm inlet pipe size.
For other settings please refer to Transformer settings
(see page 11).
• Refit the hatch and tighten the screws to make
the transformer water resistant.
6
The Whale Instant Match
.
wireless technology transformer includes
Activelink diagnostics to aid installation:
On the transformer are two indicator LEDs
• The blue LED flashes every 10 seconds indicating
that power is on.
• The green LED flashes when water is flowing
through the shower.
• When the test button is depressed the buzzer beeps.
WITH
10
®
wireless technology
with Bluetooth
® ®