Ozito OBL-0185 Instruction Manual

Ozito OBL-0185 Instruction Manual

Cordless blower kit

Advertisement

Quick Links

CORDLESS
BLOWER KIT
18V Lithium Ion
INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
18V
Max. Air Speed:
210km/hour
Battery:
1.5Ah Li-Ion
Charge Time:
4-5 Hours
No Load Speed:
12,500/min
Weight:
1.62kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty. Lithium
Ion batteries are covered by a 12 month warranty. Warranty
excludes consumable parts, for example: blower tube.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.

STANDARD EQUIPMENT

Blower Housing
Blower Tube
1.5Ah Li-Ion Battery
Battery Charger
OBL-0185
0119

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OBL-0185 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito OBL-0185

  • Page 1 12,500/min Weight: 1.62kg ozito.com.au Battery Charger OBL-0185 WARRANTY The benefits provided under this warranty are in addition IN ORDER TO MAKE A CLAIM UNDER THIS to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS BLOWER 1. ASSEMBLY 1. Blower tube 4. Sure grip handle 2. Blower tube release 5. Air intake vent WARNING! ENSURE THE BLOWER IS SWITCHED 3. On/off switch 6. Battery seating OFF AND BATTERY DISCONNECTED BEFORE ASSEMBLY AND/OR MAINTENANCE.
  • Page 3 2. BATTERY CHARGING Charging the Li-Ion Battery Battery Charge Indicator The included battery is CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, equipped with a battery charge WE RECOMMEND THE USE OF A RESIDUAL CURRENT indicator to show the state of DEVICE (RATED 30mA OR LESS).
  • Page 4 Be careful where you point the jet of air as it can move heavy material and cause injury or damage to bystanders. Note: Be aware of other people and animals in the area where you are to be operating the blower. Note: Avoid collisions with hard objects which could damage your blower OBL-0185...
  • Page 5 Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486...
  • Page 6 The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.

Table of Contents