Related Manuals for Ozito OZCBL18VA
Summary of Contents for Ozito OZCBL18VA
- Page 1 Cordless Blower 18 Volt Operation Manual 2 Year Replacement Warranty OZCBL18VA 1008 www.ozito.com.au To view the full range visit:...
-
Page 2: Specifications
SPECIFICATIONS - MODEL NO. OZCBL18VA Batteries: 2 x 18V, 1.3Ah Ni-Cd Charge time: 3-5 hour No load speed: 13,000 /min Air Speed: 160 km/h Air volume: 424 CF/m Features: 2 x Batteries Soft grip rear handle Direction nozzle 1. Air output 5. -
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS ………………………………………… Page 2 TABLE OF CONTENTS…………………………………... Page 3 INTRODUCTION………………………………………… Page 4 SAFETY INSTRUCTIONS……………………………….. Page 4 CHARGING YOUR BATTERIES………………………… Page 8 ASSEMBLY ……………………………………………….. Page 9 OPERATION ……………………………………………… Page 9 MAINTENANCE …………….…………………………… Page 10 DESCRIPTION OF SYMBOLS ………………………….. Page 10 CONTENTS ………………………………………………... -
Page 4: Introduction
Blower. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Ozito Cordless Blower OZCBL18VA has been designed for blowing debris, leaves and grass clippings from courtyards, driveways, patios, car parks, footpaths etc. - Page 5 GENERAL Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) WORK AREA a) Keep work area clean and well lit.
- Page 6 GENERAL (cont.) e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- Page 7 • Do not disassemble charger, if service or repair is required. Incorrect reassembling may result in a risk of electric shock, electrocution or fire. New chargers can be obtained through Ozito. • To reduce risk of electric shock, unplug charging adaptor from the socket outlet before attempting any cleaning.
-
Page 8: Charging Your Batteries
CHARGING YOUR BATTERIES The batteries have been shipped in a low charge condition to prevent possible problems, therefore you should charge them prior to use. • Plug the adaptor in an appropriate AC power outlet (power-point) and connect the adaptor lead to the charging stand. The GREEN light on the charging stand indicates that the AC power is being supplied. -
Page 9: Assembly
ASSEMBLY Assembling the Direction Nozzle Align the wide end of the nozzle to the opening of the blower housing. The small hole on the connecting side of the nozzle should be matched up with the notch on the blower housing. Join the two by pushing them together. To Remove the Battery Pack •... -
Page 10: Maintenance
Should the tool not be used for long periods of time, recharge the batteries every two months. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person, or mishandling or mistreatment of the tool. -
Page 11: Contents
Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Blower OZCBL18VA 1 x Direction nozzle 2 x 18V Batteries 1 x Operation Manual... -
Page 12: Warranty
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 2 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 24 months from the ORIGINAL date of purchase under the following conditions: Professional, industrial or high frequency use will VOID this warranty.
Need help?
Do you have a question about the OZCBL18VA and is the answer not in the manual?
Questions and answers