Ozito OAM-565 Instruction Manual

Ozito OAM-565 Instruction Manual

Air mover 565cfm

Advertisement

Quick Links

AIR MOVER
565CFM
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage:
220–240V ~ 50Hz
Input Power:
150W
Speed Settings:
3
Max. Air Velocity: 72km/h
Max. Air Volume: 16m³/min (565cfm)
Cord Length:
3.66m
Weight:
3.58kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
Air Mover
OAM-565
0819

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OAM-565 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito OAM-565

  • Page 1 Cord Length: 3.66m Weight: 3.58kg ozito.com.au OAM-565 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. WARRANTY YOU MUST RETURN THE PRODUCT...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION AIR MOVER 1. OPERATING POSITIONS 1. 3 Speed On/Off Dial 5. Air Intake Grill 2. Reset Button 6. Air Outlet 3. Cord Organiser Handle 7. Stacking Pins WARNING! ENSURE THE TOOL IS PLACED ON A 4.
  • Page 3: Operation

    ‘I’, ‘II’ or ‘III’ position. WARNING! DO NOT CONTINUE USING THE AIR MOVER UNIT IF THE OVERLOAD SWITCH TRIPS AGAIN IMMEDIATELY AFTER THE RESET; CONTACT OZITO CUSTOMER SERVICE. WARNING! DO NOT MOVE OR CARRY THE AIR MOVER WHILE IT IS IN OPERATION. WARNING! DO NOT LEAVE THE AIR MOVER UNATTENDED WHILST IT IS IN OPERATION.
  • Page 4: Troubleshooting

    Cease use immediately if the overload protection switches off the unit again on restart. Contact Ozito Customer Service. Air mover runs A drop or impact may but makes loud have deformed the Contact Ozito Customer...
  • Page 5: Maintenance

    If replacement of the supply cord is necessary, this has to be done by a certified electrician in order to avoid a safety hazard. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or...
  • Page 6: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less).

Table of Contents