Ozito PBL-030 Instruction Manual

Ozito PBL-030 Instruction Manual

Petrol blower 30cc 2 stroke

Advertisement

PETROL
BLOWER
30cc 2 Stroke
INSTRUCTION MANUAL

SPECIFICATIONS

Engine:
30cc, 2-Stroke
Power Output:
0.95 kW (1.3HP)
Fuel Mix
40:1
Air Speed:
260 km/h
Max. Speed:
7,620rpm
Fuel Tank Capacity:
550 ml
Spark Plug:
TORCH L8RTC
Weight:
4.8 kg
ozito.com.au
1
WHAT'S IN THE BOX
Blower
Hedge Trimmer
Blade Cover
Direction Nozzle
Fuel Mixing Bottle
Fuel Mixing Bottle
Spark Plug Wrench
Spark Plug Wrench, Hex Key &
Assembly Screw
Screwdriver
Spanner
PBL-030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PBL-030 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito PBL-030

  • Page 1: Specifications

    Air Speed: 260 km/h Max. Speed: 7,620rpm Fuel Tank Capacity: 550 ml Fuel Mixing Bottle Fuel Mixing Bottle Spark Plug: TORCH L8RTC Weight: 4.8 kg ozito.com.au Spark Plug Wrench Spark Plug Wrench, Hex Key & Assembly Screw Screwdriver Spanner PBL-030...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION PETROL BLOWER 1. ASSEMBLY 1 Direction Nozzle 7 Throttle Lever 2 Spark Plug 8 Throttle Trigger CAUTION: ENSURE THE TOOL IS SWITCHED OFF BEFORE 3 Priming Bulb 9 Recoil Starter PERFORMING ANY OF THE FOLLOWING ASSEMBLY. 4 Air Filter 10 Fuel Tank Attaching the Handle...
  • Page 3: Operation

    OPERATION 3. STARTING & STOPPING 2. FUEL & OIL Pre-startup checks CAUTION: BE SURE TO STOP THE ENGINE BEFORE REFUELLING. DO NOT SMOKE WHILE REFUELLING. 1. Ensure that the nozzle has been fitted and the handle is secured MOVE AT LEAST 3M AWAY FROM THE FUELLING POINT tightly in the correct position.
  • Page 4: Adjusting The Speed

    4. ADJUSTING THE SPEED Warm Starting The blower has 2 speed adjustments, the throttle trigger allows fast speeds changes whereas the throttle lever will maintain a speed once set. 1 Set the blower on a hard, level surface and the on/off switch Throttle Trigger to the On position “...
  • Page 5: Operating The Blower

    Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or mishandling Note: Avoid collisions with hard objects which could damage your or mistreatment of the blower.
  • Page 6: Filter Maintenance

    MAINTENANCE 7. FILTER MAINTENANCE 8. SPARK PLUG MAINTENANCE INCREASE SPEED DECREASE Spark Plug: Torch L8RTC, Champion RCJ6Y, NGK BPMR7A or Dirty air filters reduce the engine output by restricting air to the SPEED equivalent. carburettor. Regular checks are therefore essential. The air filter should be checked after every 25 hours of use and cleaned if necessary.
  • Page 7: Troubleshooting

    Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito customer service Australia 1800 069 486 New Zealand 0508 069 486 E-mail: enquires@ozito.com.au...
  • Page 8: Safety Instructions

    SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow serious personal injury. the warnings and instructions may result in electric shock, fire and/or serious b) Use safety equipment. Always wear eye protection. Safety equipment such as a injury.
  • Page 9: Warranty

    • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0714...

Table of Contents

Save PDF