Table of Contents
Advertisement
To send all selected settings and preferences to the
NOTE
watch select "Transfer configuration" in the "communication"
sub-menu (PC software).
DOWNLOAD DATA
Follow these procedures to download data
1. After installing the CD-ROM click the OUTBREAKER icon on
your PC.
2. In the man menu, select "Communication".
3. Connect the docking station to your PC.
4. Press "Mode" until you reach PC Mode.
5. Fit the OUTBREAKER watch in the docking station, making
sure the pins are matched and secured.
6. Close the cover gently and select "Connect" in the "Commu-
nication" sub-menu.
7. You will see an arrow mark on the watch, and "download in
progress" on your PC.
8. Select "Read Trip Data" in the "Communication" sub-menu,
then follow the on screen instructions.
9. Select "Format" to process the data arrangement.
10.Download is now complete. Select desired graphical report.
EFFECTIVE USE AND RANGE
The watch and heart rate chest belt have a maximum transmis-
sion range of about
30 inches (76
weak take the following steps:
• Shorten the distance between the heart rate chest belt and
watch
• Re-adjust the position of the heart rate chest belt
• Check the batteries. If they are low or exhausted, change the
battery immediately
You can wear the receiver watch on your wrist or strap it to a
bike or exercise machine as shown below:
AQUATIC AND OUTDOOR ACTIVITIES
The watch is water-resistant up to 50 meters. The chest belt and
other accessories (bike mount/speed and cadence sensors)
are splash-proof up to 10 meters, but should not be worn for
underwater activities, as the heart rate transmission cannot
work properly under water.
guidelines.
24
centimeters). If the signal is
Refer to the table below for
Advertisement
Table of Contents
