I-Tech KKF1040B-TR User Manual page 11

Installing the USB Monitor Software
• Make sure to connect the USB cable and begin the installation after your PC has booted.
• The Setup program requires about one minute for the installation. If you turn the power
off or remove the USB cable while the Setup program is running, it may cause an error
with the PC or the Windows operating sys-tem.
• The optimal resolution for this USB monitor is 800x600.
1. Insert CD into the CD-ROM drive. Click "USB Monitor Driver"
2. Click "I Accept".
3.The progress window appears, as shown in the figure below.
4. If you connect your USB monitor to your PC, it recognizes the monitor and the "Found New
Hardware" wizard is displayed, as shown in the figure below.
10