Related Manuals for I-Tech KK1500-TR
Summary of Contents for I-Tech KK1500-TR
- Page 1 Touch Display LCD Monitor User Manual Installation Guide 15” Resistive Touch LCD Monitor MODEL: KK1500-TR i-Tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.iTechLCD.com...
-
Page 2: Table Of Contents
" " Warning! It will cause malfunction if the monitor is operating with unspecified power supply unit or incorrect power voltage. Do not exposure this unit in the rain or moisture environment to reduce the risk of fire or electric shock. Content: FCC Warning Statement................. -
Page 3: Fcc Warning Statement
I. FCC Warning Statement WARNING Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. -
Page 4: Introduction
II. Introduction 15" Resistive Touch Monitor is color TFT LCD monitor, integrate with ELO or TWN resistive touch, suitable for many types of application. Optional MSR and 2 display, please contact our regional distributor for further information. Features Optimal display resolution 1024 * 768 VESA 75 * 75 mm wall mount standard Durable and sturdy base design Optional 3 tracks Magnetic Strip Reader (MSR) -
Page 5: Unpacking The Monitor
Unpacking the monitor Put the monitor on a clean surface, make sure the box in upright position. Remove packing materials from inside of box. Check accessory Please make sure all the accessory are included: Standard Items a. LCD Monitor b. -
Page 6: Installation
III. Installation I/O placement 1 DC JACK 2 DVI 3 VGA 4 USB B Type 5 Dual USB A Type 6 RS232 7 RJ45(RS232) To PC 1. Connect VGA cable from monitor to PC 2. Connect USB touch cable to PC 3. -
Page 7: Touch Driver Installation
Touch Driver installation TWN Touch： 1. Double click “setup.exe” from driver menu 2. Click “next” from welcome window 3. Click “next” from choose destination location window 4. Click “next” from ready to install the program 5. Click “next” from setup type 6. - Page 8 Calibration procedures: Double click “POS Touch+” icon to run calibration function Follow 9 points linearity calibration procedures and save the data Follow free draw calibration Exit calibration menu Reboot PC Version. 1.0...
- Page 9 ELO Touch： 2. Click “Unzip” from WinZip 1.Install ELO Touch screen Driver Self-Extractor-ELO_v463.exe 4.Select Install Serial or USB Touch screen 3. Click “next” from Select Language Driver 5.Click-on “Yes” after Installation 6. Click-on “Finish” Version. 1.0...
- Page 10 Calibration procedures: 1. Double click “Elo Touch screen” icon to run calibration function 2. Follow 3 points linearity calibration procedures and save the data 3. Exit calibration menu Version. 1.0...
-
Page 11: Msr Installation (Optional)
MSR installation (optional) Components of MSR Kit: Screws ❶ ❷ ❸ ❹ Open the MSR back cover. Connect the USB cable. Fasten the screws (x2). Close the MSR back cover and fasten screw (x1). Version. 1.0... -
Page 12: Vfd (Optional)
VFD (optional) Components of VFD Kit: Screw 1. Remove the screws (x3). 2. Open the Hinge Cover and I/O Cover 3. Connect the VFD cable to the COM port of the monitor. 4. Place the Hinge Cover onto the rear side of the display. Version. - Page 13 3. Fasten the screws (x2) to fix the VFD bracket to the Hinge bracket. 4. Fix the Stand by fastens the screws (x2). Version. 1.0...
-
Page 14: Control Buttons
Control Buttons a.) Pressing to execute AUTO-Adjusting function. This function will set the monitor display area to the optimal position. Auto Adjusting b.) Sometimes this function can't achieve the optimal effects. Please follow the manual adjusting procedure. When the light bar move other item, the key are used to select it, and read to adjust. -
Page 15: Structure Of Osd Settings
Structure of OSD settings Third First Level Second Level Operating Procedure Level Press “UP” or “DOWN” to adjust H-phase & Auto Adjust H-position & V-position clock automatically. Press “UP” key to increase brightness, “DOWN” Brightness key to decrease brightness. Luminance Contrast Press “UP”... -
Page 16: For Your Safety
IV. For your safety When move the monitor, always switch off power and disconnect all cables to avoid any danger. Please use the power and signal cables correctly when install or bend it. In case of notice any abnormal smell or noise, please stop operation and call the nearest dealer or service center. -
Page 17: Mechanical Dimension
VI. Mechanical Dimension Version. 1.0... -
Page 18: Product General Specification
VII. Product General Specification Model Monitor Monitor with stand Cabinet color Black Display size 15.0" Active Area 304 * 228 mm Optimal Resolution 1024 * 768 Color Arrangement RGB-stripe Brightness 250 cd/m² (typ) Contrast Ratio 600:1 Response Time 8 ms (typ) 160 degrees (H) Viewing Angle 160 degrees (V)
Need help?
Do you have a question about the KK1500-TR and is the answer not in the manual?
Questions and answers