Summary of Contents for Campania International Triad FT-285
Page 1
FT-285 Triad Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 5 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG • Compatible with #10 Refill Device and LED kits •...
Page 2
FT-285 Triad Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-285 Triad Fountain Assembly Instructions Step 10 - Place the water control plate (FT-285B) over the pipe in the top of the water feature (FT-285A). FT-285B (5 lbs) 4"L x 4"W x 1"H Step 11 - Fit the pump cover door (FT-285D) into the pump cover (FT-285C). Step 12 - Let the fountain sit 24 hours before filling with water.
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.