Summary of Contents for Campania International St. Remy FT-281
Page 1
FT-281 St. Remy Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 30 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kits •...
Page 2
FT-281 St. Remy Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-281 St. Remy Fountain Assembly Instructions Step 10 - Place the pump cover door (FT-281C) in the pump access opening of the pump cover. Step 11 - Fill the fountain with water. FT-281C (3 lbs) 6.75"L x 2.25"W x 5.75"H...
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.