Summary of Contents for Campania International La Mirande FT-289
Page 1
FT-289 La Mirande Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kits. •...
Page 2
FT-289 La Mirande Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-289 La Mirande Fountain Assembly Instructions Step 10 - Position the small pedestal (FT-273C) over the center of the large bowl (FT-289E). Step 11 - Feed the tubing through the hole and to the top of the small pedestal (FT-273C). FT-273C (30 lbs) 13.75"W x 9"H Step 12 - Position the small bowl (FT-289B) over the small pedestal (FT-273C).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.