Sneak-A-Cup; Brew Later - Black & Decker Select-A-Size Easy Dial CM4200 Series Manual

2. Fill water reservoir with desired amount of water. Do not fill past the MAX line.
Close water reservoir cover.
3. Open filter basket cover.
4. Place an 8-12 cup basket-style paper filter into removable filter basket. Place
basket into filter basket holder.
5. Add desired amount of ground coffee. Close filter basket cover.
6. Make sure carafe lid is properly attached to the empty carafe. Close the lid.
Note: Coffee may overflow if carafe lid is not properly placed.
IMPORTANT: The coffeemaker will brew without the right amount of water.
Always check that the amount of water in the reservoir is equal to or greater than
the number of cups selected.
7. Place empty carafe on the carafe plate.
8. Plug power cord into an outlet.
9. Turn the serving control dial to the number of cups you wish to brew.
10. If regular brew strength is desired, your coffeemaker is set to brew coffee.
11. If strong coffee is desired, press the STRONG button once to select the strong
brew. The word STRONG is displayed.
12. Press Brew Now button and brewing begins.
13. Once coffee grounds have cooled, carefully open cover and, discard used
grounds. Close cover.
14. The coffeemaker will keep brewed coffee hot for 2 hours and then
automatically turn off. This can be adjusted by using the KEEP WARM button.
Options are Off, 30, 60, 90, 120 minutes.
To turn off the coffeemaker at any time: press the Brew Now button, making certain
that the light ring around the button turns off. Unplug appliance when not in use.

SNEAK-A-CUP

Remove the carafe and brewing is paused. The carafe must be placed back on the
carafe plate in 30 seconds to prevent overflow. Brewing begins again.

BREW LATER

1. Follow steps 1 through 9 under BREWING COFFEE.
2. Make sure clock has been set to correct time of day.
3. Press the BREW LATER button.
4. The digital clock will flash 12:00.
Note: If the coffeemaker has not been unplugged, the last delayed brewing time
will appear on the digital display.
5. To set or change the brewing later time: Press HOUR button until the desired
hour appears on the display. Press the MIN button to select the minutes.
6. After 4 seconds with no button pressed, the delayed brewing will be activated
and BREW LATER SET will be displayed.
7. To check the preset brewing time, press the BREW LATER button. Four
seconds after the button is released, the clock time will display again.
8. If you want to change the preset brewing time, go through steps 3 to 6 as
outlined above.
FEATURE
®
6