[Stabilizer]; [Date Stamp]; [Clock Set] - Panasonic Lumix DMC-FX90EB Operating Instructions Manual

Table of Contents

Advertisement

[Stabilizer]

Applicable modes:
Using this mode, jitter during picture taking is detected, and the camera automatically
compensates for the jitter, enabling jitter-free images to be taken.
When recording motion pictures, "Active Mode" (stabilizer for motion pictures) will
automatically function. This decreases the jitter of the image when recording motion
picture while walking, etc.
[
] ([On])/[
] ([Off])
Note
The stabilizer function may not be effective in the following cases.
Be careful of camera jitter when you press the shutter button.
When there is a lot of jitter.
When the zoom magnification is high.
In Digital Zoom range.
When taking pictures while following a moving subject.
When the shutter speed becomes slower to take pictures indoors or in dark places.
The setting is fixed to [On] in [Self Portrait] or [Handheld Night Shot] in Scene Mode.
The setting is fixed to [Off] in [Starry Sky] in Scene Mode.
In "Active Mode", stronger effect of the correction can be achieved at the wide end.
Active Mode will not work in the following cases:
[VGA] of [MP4] is selected.
[Pin Hole] or [Film Grain] is selected in Scene Mode.

[Date Stamp]

Applicable modes:
You can take a picture with date and time of recording.
[
] ([W/O Time])
[
] ([With Time])
[
] ([Off])
Note
Date information for pictures recorded with the [Date Stamp] set cannot be deleted.
When printing pictures with [Date Stamp] at a shop or with a printer, the date will be
printed on top of the other if you choose to print with the date.
If the time has not been set, you cannot stamp with the date information.
The setting is fixed to [Off] in the following cases.
In [Panorama Assist], [Hi-Speed Burst] and [Flash Burst] in Scene Mode
[Auto Bracket] and [Burst] in [Rec] Mode menu
When recording motion pictures
[Text Stamp], [Resize] and [Cropping] cannot be set for pictures recorded with [Date Stamp]
set.
Even if you take a picture with [Date Stamp] set to [Off], it is possible to stamp dates into the
recorded pictures using [Text Stamp]

[Clock Set]

Refer to
P17
for details.
Recording
Stamp the year, month, and day.
Stamp the year, month, day, hour, and minutes.
(P102)
or setup the Date print (P109, 159).
- 92 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fx90

Table of Contents