Table of Contents
Advertisement
[Auto Bracket]
Applicable modes:
In this mode, 3 pictures are automatically recorded in the selected exposure
compensation range each time the shutter button is pressed.
With Auto Bracket d1 EV
1st picture
d0 EV
1
Touch [
] during exposure compensation.
2
Adjust the compensation range of the exposure by
touching [
•
When you do not use Auto Bracket, select [OFF] (0).
3
Touch [Exit].
•
Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range. Exposure value is
displayed on the screen when the exposure is compensated.
•
The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
•
[Œ] is set for the flash when Auto Bracket is set.
•
Setting of the Auto Bracket cannot be performed in following conditions.
–
In [Transform], [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst],
[Starry Sky], [Pin Hole], [Film Grain] and [Photo Frame] in Scene Mode
–
When recording motion pictures
]/[
].
Recording
2nd picture
j1 EV
- 87 -
3rd picture
i1 EV
Advertisement
Table of Contents
