Table of Contents
Advertisement
3. Specifications
(1) Imaging device
No. of total pixels
Pixel size
No. of effective pixels
(2) Sensing area
(3) TV format
(4) Lens mount
(5) Flange focal distance
(6) Hor. Scanning freq.
(7) Vert. Scanning freq.
(8) Sync system
(9) Int. sync scanning system
(10)Ext. sync input
(11)Video output
(12) Resolution
(13) Sensitivity
(14) Min. illumination
(15) Signal-to-noise ratio
(16) Electronic shutter
KP-M1A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
interline CCD
EIA :811(H) ×508(V)
CCIR:795(H)×596(V)
EIA :11.64(H)×13.5(V)µm
CCIR:11.6(H)×11.2(V)µm
EIA :768(H)×494(V)
CCIR:752(H)×582(V)
EIA :8.94 ×6.67mm(2/3 inch size)
CCIR:8.72 ×6.52mm(2/3 inch size)
EIA/CCIR
C-mount
17.526mm(Not adjustable)
EIA:15.734kHz CCIR:15.625kHz
EIA:59.94Hz
CCIR:50Hz
Internal/external (automatic switching)
2:1 interlaced
No. of Hor. lines:525(625 CCIR)
fv=2fH/525(625 CCIR)
HD/VD : 2 to 6Vp-p,negative
Input impedance : 1kΩ
Frequency deviation : ±1%
1.0Vp-p/75Ω, unbalanced
Video: 0.7Vp-p
Sync: 0.3Vp-p, negative
EIA : 570TVL(H)/485TVL(V)
CCIR: 560TVL(H)/575TVL(V)
400Lx, f4, 3200K
0.3Lx, fl.4, AGC:ON, GAMMA:ON,
W/O IR cut filter
56dB
1/10000, 1/4000, 1/2000, 1/1000, 1/500,
1/250, 1/125, 1/120(CCIR), 1/100(EIA)sec
OFF :Normal exposure
Settable from external switch.
Set to OFF at factory.
- 4 -
Advertisement
Table of Contents
