Security; Ip Filtering - SmartRG SR505N User Manual

Appendix A – Troubleshooting

Security

To access the Security window, click the Security button in the Advanced Setup directory. The Security button appears after configuring WAN
interface in PPPoA, PPPoE, IPoE or IPoA.

IP Filtering

The IP Filtering button appears when configuring WAN interface in PPPoA, PPPoE, IPoE or IPoA.
IP Filtering - Outgoing
This window allows you to create a filter rule of Outgoing.
Click change default policy to change the mode of policy.
Now default policy is BLOCK, it means all outgoing IP traffic from LAN is
blocked, but some IP traffic can be accepted by setting up filters.
If you are setting up the outgoing IP filtering, click the Add button.
Now default policy is ACCEPT, it means all outgoing IP traffic from LAN is
allowed, but some IP traffic can be Blocked by setting up filters.
If you are setting up the outgoing IP filtering, click the Add button.
V33 User Manual 29