Samsung FlexWash WV60M9900AV/A5 User Manual page 69

Symptom
Excessive suds.
Cannot add additional
detergent.
The washer stops.
FlexWash_WV9900M_DC68-03768A-04_EN.indd 69
• Make sure you use the recommended types of detergent.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
• Do not fill the detergent or fabric softener compartments
beyond the marked max fill limit.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door, and then press and hold START/PAUSE to start
the washer. For your safety, the washer will not tumble or
spin unless the door is closed.
• Before the washer starts to fill, it will make a series of
clicking noises to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait and
the washer may start.
• Make sure the mesh filters of the water supply hoses at the
taps are not clogged. Periodically clean the mesh filters.
• If the washer is not supplied with sufficient power, the
washer temporarily will not drain or spin. As soon as the
washer regains sufficient power, it will operate normally.
Action
English 69
2017-05-22 7:03:37