Page 1
#YourGearUpgraded Duel Screen Monitor Mount for Gaming INSTRUCTION MANUAL Model Echo-gm2Fc...
Page 2
If you do not understand these instructions, are a noob or have doubts about the safety of the installation, assembly or use of this product, contact: The Echogear Pros @ 1-855-428-2490 or www.echogear.com. CAUTION: Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Page 3
Size up Your Mounting Surface 0.8 in. - 2.6 in. UUUUHHH ?!? (20 mm - 66 mm) Unsure? DESKTOP THICKNESS Contact The Echogear Pros: 1-855-428-2490 www.echogear.com Power up! Grab These Tools from Your arsenal BOnus Loot! 3 FREE Inside Every Box...
Page 4
Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S. based Echogear Pros answer the phone in all days ending in Y. That means availability to try and stump our expert staff 7 days a week.
Page 5
Here's your Loadout WARNINGS: DON'T ALLOW CHILDREN TO FEED ON CONTENTS AND NEVER USE DAMAGED GOODS! ► This product contains small items that are a choking hazard if swallowed. ► Before you start assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Page 6
Gear FOR Level 2 8 Screws 8 Screws M4 X 12mm M4 X 30mm 8 Spacers 8 Spacers 22mm Gear FOR Level 3 2 Cable 4 Screws Covers 8-32x 3/8 in...
Page 7
Level 1 Lock N' LOAD! Assemble Mount and Clamp To Desk STAGE 1: Plaster Soft Bumpers on Desk Clamp...
Page 8
STAGE 2: Loosen Screw To Lower Clamp USE HEX KEY TO LOWER CLAMP.
Page 9
STAGE 3: Tighten Screw To Attach Clamp to Desk USE HEX KEY TO SECURELY CLAMP IT DOWN.
Page 10
STAGE 4: Attach Both Arms to Mount USE HEX KEY TO TIGHTEN. N O T E : ALL PARTS ARE THE SAME FOR BOTH SIDES.
Page 11
Level 2 Make The DROP! Attach Monitor to Mount STAGE 1: Determine Screw Length and Spacer Size NOT NEEDED NEEDED FOR Flat Inset Round Flat Monitor Cables Monitor Holes Monitor Select Spacers (if needed) Short Screw Long Screw Select Screws Bracket Bracket 11/12...
Page 12
STAGE 2: Partially Insert Top Screws into Monitor...
Page 13
STAGE 3: Hang Monitor by Top Screws onto Bracket...
Page 15
STAGE 5: Test and Tighten All Screws to Secure Moniter IMPORTANT: YOU SHOULD TEST THE TENSION OF THE ROTATING BRACKET R TO ASSURE THE MONITOR MOVES WITH EASE AND STAYS IN POSITION BEFORE TIGHTENING ALL SCREWS. See page 20 to adjust bracket tension.
Page 16
STAGE 6: Repeat Level 2 Again to Complete Mission...
Page 17
Level 3 Control the Melee! Route and Disguise Cables STAGE 1: Route All Cables Through Brackets NOTE: FOR THICKER CABLES USE HEX TO LOOSEN SCREWS ON ARM BRACKET AND SLIDE BRACKET OUT. Lefty Righty Loosey Tighty...
Page 18
STAGE 2: Secure Cables with Arm Cover "U R A BOSS" I MP O R T ANT : L E AVE ENO UGH S L AC K IN T H E C AB LE S TO ASS UR E T H E MO NI TO R AND AR MS MOVE W IT H E AS E.
Page 19
Bonus Level! Adjustments /Modifiers Vertical Position - Adjust Monitor Up and Down TIP: INITIALLY, NEARLY ALL MONITORS WILL REQUIRE POSITIVE ADJUSTMENT (UP TO 20 TIMES). IF THE MONITOR IS NOT STAYING AT DESIRED HEIGHT OR NOT MOVING WITH EASE: • ADJUST TENSION SCREW ON THE TOP OF THE MOUNT. = MORE TENSION OR = LESS TENSION.
Page 20
Tilt & Level - Tilt and Turn Monitor 360 WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. IF MONITOR DOES NOT MOVE WITH EASE OR WILL NOT LOCK INTO DESIRED POSTION: Remove the monitor. Turn the screw on the tension bracket either counter-clockwise (loosen) or clockwise (tighten) .
Page 21
Horizontal Position - Adjust Monitor Left or Right WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. Top View Desk Desk...
Page 22
How to remove Mount from Monitor and Surface 1. Remove Cables 2. Remove 3. Remove Arms/Mount Monitors...