Priority Scan; Scan Revert - Kenwood TK-5810-K2 Instruction Manual

Table of Contents

Advertisement

P
S
RIORITY
CAN
A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to
the Priority channel when a call is received on it, even if a call is being received
on a normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over
Priority channel 2. So, if a call is received on Priority channel 1 while a call is
already on Priority channel 2, the transceiver will automatically change to Priority
channel 1.
• "P1" appears on the sub-display when the displayed channel is Priority channel 1, "P2"
appears when the displayed channel is Priority channel 2, and "PP" appears when the
displayed channel is both Priority channel 1 and Priority channel 2.
S
R
CAN
EVERT
The Scan Revert channel is the channel selected when you press the PTT switch
to transmit during Scan. Your dealer can program 1 of 6 types of Scan Revert
channels on your transceiver:
• Selected: The last zone and channel selected are assigned as the new revert zone and
channel.
• Selected + Talkback: If the zone and channel have been changed during Scan, the
newly selected zone and channel are assigned as the new revert zone and channel.
The transceiver "talks back" on the current receive channel.
• Priority 1: If your dealer has programmed a Priority 1 channel, this channel is the
revert zone and channel.
• Priority 1 + Talkback: If your dealer has programmed a Priority 1 channel, this channel
is the revert zone and channel. The transceiver "talks back" on the current receive
channel.
• Priority 2: If your dealer has programmed a Priority 2 channel, this channel is the
revert zone and channel.
• Priority 2 + Talkback: If your dealer has programmed a Priority 2 channel, this channel
is the revert zone and channel. The transceiver "talks back" on the current receive
channel.
• Last Called: The last channel on which you made a call is assigned as the new revert
channel.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tk-5810Tk-5710hTk-5810hTk-5710Tk-5810-k

Table of Contents