Table of Contents
Advertisement
S
(S
ELCALL
ELECTIVE
A Selcall is a voice call to a particular station or to a group of stations.
T
RANSMITTING
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status to enter Selcall
mode.
3 Press the GRP
the station you want to call.
• Alternatively, you can enter a station ID using a DTMF keypad.
4 Press the microphone PTT switch and begin your conversation.
• Alternatively, you can press the PF 4 key to page the selected station, rather
than making a voice call.
R
ECEIVING
An alert tone will sound, the transceiver will automatically enter Selcall mode,
To respond to the call, press the microphone PTT switch and speak into the
microphone.
I
C
DENTIFICATION
ODES
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Select "ALL" Fleet and "ALL" ID to make a call to all units (Broadcast call).
Note: The ID range may be limited by programming.
S
M
TATUS
ESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 15 received messages can be stored in the Stack memory of your
transceiver. These saved messages can be reviewed after reception. Depending
on your dealer settings, when the Stack memory is full, either the oldest message
will be erased when a new message is received or the new message will not be
stored in the Stack memory.
• The
(KCH-14) or
stored in the Stack memory.
C
)
ALLING
and
keys or rotate the CH control to select the ID of
(KCH-15) icon appears when a message is
19
Advertisement
Table of Contents
