Priority Scan - Kenwood TK-190K Instruction Manual

Priority Scan

A priority channel must be programmed in order for
Priority Scan to operate. A "P" appears on the
display when the priority channel is selected.
During Scan, the transceiver automatically reverts to
the priority channel when a signal is received on it,
even if a signal is being received on your current
channel.
Note:
Your dealer programs the amount of time it takes for the
transceiver to check for a signal on the priority channel.
If programmed by your dealer, you can temporarily add or delete
the priority channel from the scan sequence.
Your dealer can program Scan to cancel the priority channel QT/
DQT tone (if a tone is set up on the channel) during Scan so that
all calls on the priority channel will be heard.
17