Deleting The Encryption Key; Password Protection - Kenwood TK-5810-K2 Instruction Manual

D E
ELETING THE NCRYPTION
1 Press the key programmed as Key Delete to enter Encryption Key Delete
mode.
2 Select the current Encryption key using the GRP
control .
3 Press the PF 3 key to delete the Encryption key.
4 Press the PF 1 or PF 2 key to exit Encryption Key Delete mode.
Note: To delete all Encryption keys (when more than one key has been set up), select "ALL".
P P
ASSWORD ROTECTION
If the transceiver is password protected, entering an incorrect password
successively 15 times will automatically delete all the Encryption keys.
• Turning the transceiver power OFF and the ON again will not reset the number of
attempts for entering an incorrect password.
26
K
EY
and keys or the CH