Advertisement

Quick Links

Copyright
Copyright © 2002 by BenQ Corporation. All rights reserved. No part
of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or com-
puter language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior
written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifi-
cally disclaims any warranties, merchantability or fitness for any partic-
ular purpose. Further, BenQ Corporation reserves the right to revise
this publication and to make changes from time to time in the con-
tents hereof without obligation of BenQ Corporation to notify any
person of such revision or changes.
FCC RF EXPOSURE INFORMATION
In August 1986 the Federal Communications Commission (FCC) of
the United States with its action in Report and Outer FCC 96-326
adopted an updated safety standard for human exposure to radio fre-
quency (RF) electromagnetic energy emitted by FCC regulated trans-
mitters. Those guidelines are consistent with the safety standard
previously set by both U.S. and international standards bodies. The
design of this phone complies with the FCC guidelines and these
international standards.
Use only the supplied or an approved antenna. Unauthorized anten-
nas, modifications, or attachments could impair call quality, damage
the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged antenna
comes into contact with the skin, a minor burn may result. Please
contact your local dealer for replacement antenna.
Warning! Read this information before using your
phone

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BenQ C600

  • Page 1 Copyright Copyright © 2002 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or com- puter language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
  • Page 2 Body-worn Operation This device was tested for typical body-worn operations with back of the phone kept 0.6 inches (1.5cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches (1.5cm) must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted.
  • Page 3 The design of your phone complies with the FCC guidelines (and Antenna care those standards). Use only the supplied or an approved replacement antenna. Unautho- rized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Phone operation NORMAL POSITION: Hold the phone as you would any other tele- phone with the antenna pointed up and over your shoulder.
  • Page 4 held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technol- ogy Research. Persons with pacemakers: • Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;...
  • Page 5 FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. Aircraft To avoid interfering with blasting operations, turn your phone OFF when in a "blasting area" or in areas posted: "Turn off two-way radio". Obey all signs and instructions.
  • Page 6 FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known--and what remains unknown--about whether these products can pose a hazard to health, and what can be done to mini- mize any potential risk.
  • Page 7 Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods.
  • Page 8 Institute is expected to bear on the accuracy and repeatability of these results. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes.
  • Page 9 where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically significant. In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones.
  • Page 10 health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data does not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety.
  • Page 11 level drops off dramatically with distance. For example, they could switch to: • a mobile phone in which the antenna is located outside the vehicle, • a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or •...
  • Page 12 4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of License note cellular telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15: 113-116, 1999.                                                ...
  • Page 13: Table Of Contents

    Table of Cotents Chapter 0: Quick Start ........1 Chapter 1: Introduction to Your Phone .... 5 Your Phone ................6 Appearance ................7 Chapter 2: Using Your Phone ......15 Basic Operations ..............16 Turning on the phone ..............16 Turning off the phone ..............16 Making a call ...................
  • Page 14 Table of Cotents Call Logs Menu ..............28 Call logs ................... 28 Messages Menu ..............29 Inbox ....................29 Compose ..................29 Outbox .................... 29 Quick Msg ..................29 Draft ....................29 Voice mail ..................30 Web Msg ..................30 Broadcasts ..................30 Msg Setting ..................
  • Page 15 Table of Cotents Language ..................47 Answer By ..................48 Auto Redial ..................48 Restore Default Value ..............49 Call Srvcs Menu ..............50 Limit Alert ..................50 Force Mode ..................50 NAM Select ..................50 System Select ................. 51 Data Service ................... 51 Voice Privacy ..................
  • Page 16 Table of Cotents "# "# "# "#    ...
  • Page 17: Chapter 0: Quick Start

    Chapter 0: Quick Start    ...
  • Page 18 BenQ C600 Mobile Phone Please follow the simple steps below to make your first call: Install the battery Place the bottom end of the battery on the phone, then press down the top side of the battery. You will hear a click when the battery is secured.
  • Page 19 BenQ C600 Mobile Phone                                                                                                                                              ...
  • Page 20 BenQ C600 Mobile Phone <Memo>    ...
  • Page 21: Chapter 1: Introduction To Your Phone

    Chapter 1: Introduction to Your Phone    ...
  • Page 22: Your Phone

    BenQ C600 Mobile Phone Your Phone Thank you for choosing BenQ mobile phone! From now on, with your mobile phone, you will experience total mobility in your life. You will be able to communicate with more freedom and convenience. We know that you demand more than what a mobile phone can offer for mobility.
  • Page 23: Appearance

    BenQ C600 Mobile Phone Appearance Front View Rear View (With battery removed) ...
  • Page 24 BenQ C600 Mobile Phone Bottom View & ...
  • Page 25 BenQ C600 Mobile Phone LCD Screen There are several icons that appear on the LCD screen to indicate the status of your phone. Please see the table below for the meaning of 2002-09-10 each icon: 11:50 Menu Book Icon Meaning Shows current signal strength.
  • Page 26 BenQ C600 Mobile Phone Displays the ring type when your phone receives an incoming call: : the phone generates a ring tone when there is an incoming call. Ring type : indicates that the phone is in silent mode and the phone vibrates when there is an incoming call.
  • Page 27 BenQ C600 Mobile Phone Keypad There are two kinds of keys on the keypad: Function Keys and Alphanumeric Keys. In each section below, "long press" a key means "press and hold a key for about 2 seconds", while "press" a key means "press and release a key immediately".
  • Page 28 BenQ C600 Mobile Phone Alphanumeric Keys There are 12 alphanumeric keys on the keypad. You can use these keys to enter numbers and letters. To enter a number, simply press the button with that number. To enter characters, press the key several times until the desired letter appears.
  • Page 29 BenQ C600 Mobile Phone Key Operations In standby mode: Press Long Press Right softkey Phonebook None Left softkey Menu None Send Outgoing call logs Redial Last Number None Power Off Qkey List None Down List phonebook None records Clear None...
  • Page 30 BenQ C600 Mobile Phone Inputting data Your phone provides two input methods for you to input various data into your phone using the keys on the keypad. You can select the desired one in the settings menu. Multi-tap Text input method When you have entered the first letter, the cursor will advance to the position of the next letter after about two seconds.
  • Page 31: Chapter 2: Using Your Phone

    Chapter 2: Using Your Phone...
  • Page 32: Basic Operations

    BenQ C600 Mobile Phone Basic Operations Turning on the phone When the phone power is off, you can long press key to turn it on. The phone beeps with a piece of music and a welcome animation will appear on the screen. After the phone is turned on, it will start searching for the network to use.
  • Page 33: Time Pause

    BenQ C600 Mobile Phone • From "Incoming Call" log, choose a number to dial and press key. • From "Missed Call" log, choose a number to dial and press key. Time pause When you enter a phone number, you can press the key to insert a time pause.
  • Page 34: Redialing A Call

    BenQ C600 Mobile Phone Redialing a call If the attempt to make a call has failed, according to the setting in Retry Mode, you can redial the last dialed number manually or let the phone redial the number automatically. Answering a call The phone rings or vibrates when a call is received.
  • Page 35: Call Waiting

    BenQ C600 Mobile Phone Phone Book: Enter Phone Book (see “Phone Book Menu” on page 25). Scheduler: Access Scheduler (see “Scheduler” on page 39). Scratch Pad: Use the built-in Scratch Pad to jot down phone numbers. You can save them as described in “Scratch pad” on page 44.
  • Page 36: Otasp Call

    BenQ C600 Mobile Phone OTASP call The OTASP (Over-The-Air Service Provisioning) from your network service provider allows you to activate your network service simply by making a phone call. For details, please contact your network service provider. Call logs You can enter the Call Logs menu by pressing on the scroll key in main menu.
  • Page 37: Reading Messages

    BenQ C600 Mobile Phone • Erase Logs: Press the “Select” soft key and then the scroll key to select the call logs to be erased ( Missed, Received, Dialed or Erase All). Reading messages Text messages When you have a new text message, the phone will generate an alert sound and the backlight will illuminate.
  • Page 38: Knowing What Your Phone Says

    BenQ C600 Mobile Phone Knowing What Your Phone Says Your phone lets you know its working status by issuing sounds or displaying text prompts on the screen. Low battery warning If the battery power is getting low, the battery icon on the screen will start to flash.
  • Page 39: Chapter 3: Menu Options

    Chapter 3: Menu Options...
  • Page 40 BenQ C600 Mobile Phone In standby mode, you can press the “Menu” soft key to enter the Main Menu. You can press on the scroll key to scroll through the menu items and press key or “Select” soft key to enter. The Main Menu includes many advanced options and you can get the most from your phone by using these functions.
  • Page 41: Phone Book Menu

    BenQ C600 Mobile Phone Phone Book Menu Add a Phone Book record (Add) Select “Add” and press “Select” soft key. Follow the steps below to add a new Phone Book record: Step 1: You will be prompted to enter a list including all the personal...
  • Page 42 BenQ C600 Mobile Phone Find a Phone Book record You can find a Phone Book record. Enter Phone Book, then scroll to “Find” and press “Select” soft key. All the Phone Book records will be listed in sequence on the LCD screen.
  • Page 43 BenQ C600 Mobile Phone Activation: Press “Select” soft key to enter, and use on the scroll key to highlight "Activation", then press “Select” soft key to enter the submenu and use on the scroll key to highlight "On" or “Off”.
  • Page 44: Call Logs Menu

    BenQ C600 Mobile Phone Call Logs Menu The Call Logs menu is where you can store and manage phone numbers. You can use on the scroll key to highlight an item and press “Select” soft key to enter. Call logs There are 6 options in the Call Logs menu.
  • Page 45: Messages Menu

    BenQ C600 Mobile Phone Messages Menu The options in the Messages Menu allow you to deal with voice mail, text messages and Email. You can use on the scroll key to highlight an item and press “Select” soft key to enter.
  • Page 46: Voice Mail

    BenQ C600 Mobile Phone Voice mail The new voice mail messages will be displayed here. You can see the number of new voice mail messages and press “Read” to connect to your voice mail box. This is a network dependent function. Please contact your network service provider for details.
  • Page 47: Chat Room

    BenQ C600 Mobile Phone Chat Room Creat a chat session that enables fast text message conversations with another phone. Email This item contains tools and mailboxes for receiving and sending emails. Write and send new messages To write a new message: There are 2 ways to write a new message: Option 1: In the Messages Menu, select “Compose”.
  • Page 48 BenQ C600 Mobile Phone Phone #: Enter the receiver’s phone number and press “OK” soft key. Phonebook: Pick up the receiver’s phone number from Phone Book. When finished, you can select “Send” soft key to send the message right away. Also, you can press on the scroll key to the option field and press “Edit”...
  • Page 49 BenQ C600 Mobile Phone View outgoing messages The messages to be sent are stored in Outbox. You can enter the Outbox by selecting “Outbox” in the Messages Menu. If you have multiple outgoing messages, press on the scroll key to browse messages.
  • Page 50 BenQ C600 Mobile Phone Callback #: You can set up the Callback number for all your outgoing messages here. You can also set up the callback number separately before you send a message. Delivery Acknowledgement: You can set up the status of message delivery acknowledgement here.
  • Page 51: Tools Menu

    BenQ C600 Mobile Phone Tools Menu The Tools Menu provides several extra tools. You can use on the scroll key to highlight an item and press “Select” soft key to enter. Browser Using Browser To enter Browser, select “Browser” in the Tools Menu and press “Select”...
  • Page 52 BenQ C600 Mobile Phone Key operations in Browser Please see the table below for the key operations in Browser: Press... To... • Return to the home page. End/Power • Long press to exit Browser. Scroll Select an item in a menu.
  • Page 53: Alarm Clock

    BenQ C600 Mobile Phone • Advanced: Provides advanced Browser setting options. Please contact your network service provider for details. Entering text in Browser You might be asked to provide text information when accessing on- line service (e.g, your ID number or sending messages), you can press alphanumeric keys to enter texts.
  • Page 54: Calculator

    BenQ C600 Mobile Phone Off: Press “Select” soft key and you can set the alarm clock function off. Calculator You can use your phone as a handy calculator. A cursor will appear at the upper left of the screen. Follow the chart below to enter numbers and arithmetic symbols.
  • Page 55: Scheduler

    BenQ C600 Mobile Phone Scheduler View your scheduler events There are 4 options in the menu. You can press on the scroll key to select an option, and press "Select" soft key to enter. View Calendar: View the calendar and see the events of a particular day.
  • Page 56 BenQ C600 Mobile Phone Add an event You can add new events to your scheduler, and you can choose to let the phone generate an alarm to remind you of the event. To add a new event, first select "Add" then press "Select" soft key to select this item, then a "Reminder"...
  • Page 57: Games

    BenQ C600 Mobile Phone Games Your phone provides 5 interesting games: Snake, Digit, Brick, Five Stone and Box World. Snake Make the snake grow longer by feeding it with as many goodies as possible. Use (up), (down), (right) and (left) to direct the snake to a goody. The longer the snake, the higher the score.
  • Page 58 BenQ C600 Mobile Phone Brick In this game you have to break an entire set of brick using a ball and a racket. When you have broken all of the bricks, you go to the next level with a new set of bricks to break.
  • Page 59: Hour Reminder

    BenQ C600 Mobile Phone Five Stone This is a traditional checker-type game in which the lining up of five pieces in a straight line scores victory. It’s a kind of gobang. Box World You have to push the boxes to the black spots to score.
  • Page 60: Quick Key

    BenQ C600 Mobile Phone Quick Key This item provides you a quick key list which allows you to find and use these common functions. With this function, you can easily find the function you want to use. Scratch pad The number you entered during a call (see “In call options” on page 18) is stored here.
  • Page 61: Settings Menu

    BenQ C600 Mobile Phone Settings Menu The options in the Settings Menu allow you to customize the date, display and other settings of your phone according to your preferences. You can use on the scroll key to highlight an item and press “Select”...
  • Page 62: Backlight

    BenQ C600 Mobile Phone • Press the alphanumeric keys to set up current hour and minute. on the scroll key to select “AM” or “PM”. Press “OK” soft key. • Then, use the alphanumeric keys to set up current date.
  • Page 63: Lcd Contrast

    BenQ C600 Mobile Phone Duration Press “Select” soft key to view the option list and use the scroll key to highlight an item, then press “Select” soft key to select. 5 Seconds: If no key is pressed after the back light is on for 5 seconds, it will be turned off automatically.
  • Page 64: Answer By

    BenQ C600 Mobile Phone Answer By When an incoming call is received, you can choose to use one of the following modes to answer that call. To choose an answer mode: • Press “Select” soft key to view the options and use the scroll key to highlight the mode you want to use: Send Key: The call can be answered by pressing “Send”...
  • Page 65: Restore Default Value

    BenQ C600 Mobile Phone Restore Default Value This item allows you to restore the default value when the phone is having problems. These default values are factory settings optimized for your phone. You will be prompted to enter your phone code...
  • Page 66: Call Srvcs Menu

    BenQ C600 Mobile Phone Call Srvcs Menu The Call Services Menu allows you to set up call and network services. You can use on the scroll key to highlight an item and press “Select” soft key to enter. Limit Alert...
  • Page 67: System Select

    BenQ C600 Mobile Phone System Select You can choose the home system to use. To select: • Use on the navigation key to scroll the options below: Home Only:    Use only home network. Automatic: phone selects home system automatically.
  • Page 68: Audio Menu

    BenQ C600 Mobile Phone Audio Menu The Audio Menu allows you to set up or change the audio settings of the phone. There are 5 submenus: Profiles, System Alert, Answer By, DTMF Setting, and Melody Editor, which provide you audio selection in the Audio menu.
  • Page 69: Security Menu

    BenQ C600 Mobile Phone Security Menu The options in the Security Menu can help keep your phone from unauthorized access. You have to enter the lock code to enter the submenu. The default lock code is the last four digits of your phone number.   ...
  • Page 70: Call Restrict

    BenQ C600 Mobile Phone Call restrict This function allows you to restrict incoming and outgoing calls. Incoming Restrict all incoming calls. Outgoing Restrict all outgoing calls. Roam Incoming Restrict all incoming calls when you are roaming. Roam Outgoing Restrict all outgoing calls when you are roaming.
  • Page 71: Chapter 4: Care And Maintenance

    Chapter 4: Care and Maintenance...
  • Page 72 BenQ C600 Mobile Phone Your phone is a delicate electronic device and should be used and handled carefully in compliance with the instructions below. Failure to observe these instructions may void your product warranty. • Do not use your phone in dusty and humid areas. Your phone is extremely vulnerable to liquid and sand grains can scratch the surface of your phone.
  • Page 73: Chapter 5: Troubleshooting

    Chapter 5: Troubleshooting...
  • Page 74 BenQ C600 Mobile Phone When you encounter problems while using your mobile phone, please refer to the following table to solve the problem. If problem persists, please contact your dealer immediately for service. Problems Possible cause How to solve the problem You are using your mobile phone in a location (e.g.
  • Page 75 BenQ C600 Mobile Phone The battery or charger is Contact your dealer. malfunctioning. Unable to charge The phone temperature is Change the battery charging the battery under 41°F or above 104°F. environment. Check to see if all connectors Poor connection.
  • Page 76 BenQ C600 Mobile Phone <Memo>...

This manual is also suitable for:

H0922

Table of Contents