BenQ M300 User Manual
  1. Manuals
  2. Brands
  3. BenQ Manuals
  4. Cell Phone
  5. M300
  6. User manual

BenQ M300 User Manual

Siemens m300: user guide
Hide thumbs Also See for M300:
Table of Contents

Advertisement

Quick Links

Download this manual
BenQ M300
Mobile Phone User's Manual

Advertisement

Table of Contents
loading

Related Manuals for BenQ M300

Summary of Contents for BenQ M300

  • Page 1 BenQ M300 Mobile Phone User’s Manual...
  • Page 2 Copyright © 2004. BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

  • Page 3: Safety Information

    Safety Information For your safety, please read the guidelines below carefully before you use your phone: Exposure to Radio Frequency Signals Max. SAR measurement EU: GSM900: 0.621 mW/g; DCS1800: 0.259 mW/g. USA: PCS1900: 0.641 mW/g. To avoid exceeding the FCC RF exposure limits, please do not wear the phone in front of your chest.

  • Page 4: Antenna Care

    • Department of Health and Welfare Canada. Safety Code 6 These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally.

  • Page 5: Electronic Devices

    All batteries can cause property damage, injury or burns if a conductive material such as jewelry, keys or beaded chains touches exposed terminals. The material may complete electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects.

  • Page 6: Hearing Aids

    • Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that the interference is taking place, turn your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives.

  • Page 7: Blasting Areas

    Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in area posted “TURN OFF TWO-WAY RADIO.” Obey all signs and instructions. Potentially Explosive Atmospheres Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions.

  • Page 8: European Union Directives Conformance Statement

    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 9: Table Of Contents

    Table of Contents Safety Information ...i 1. Preparing Your Phone For Use... 1 Inserting Your SIM Card ... 1 Installing the Battery ... 2 Installing the Back Cover ... 2 Charging the Phone... 3 Turning the Phone On ... 4 2.
  • Page 10 Speed Dialing ... 24 Listening to Voicemails ... 25 Phone Book... 26 Adding Contacts to the Phone Book...26 SIM Card Phone Book ...29 Finding Contacts in the Phone Book ...30 Last Missed, Dialed, and Received Calls... 32 Operations During a Call ... 34 In-Call Menu ...
  • Page 11 Symbol Input Mode ...67 Direct Connection to URLs ... 68 4. Menus ... 70 Phone Book... 70 Find ...70 Add...70 Edit ...71 Copy ...71 Delete ...71 Caller Group ...71 Business Card ...72 My Number ...73 Memory Status ...73 Call Records ... 74 Missed Calls ...74 Received Calls ...74 Dialed Calls...74...
  • Page 12 Melody ...82 Cleanup All ...83 Memory Status ...83 Tools... 84 Alarm ...84 World Clock ...85 Calendar...86 Shortcuts ...87 Calculator...88 Currency Converter ...88 Stopwatch ...89 Oper. Service... 90 WAP Service ...90 STK...104 Settings ... 105 Date & Time ...105 Auto Power On/Off...105 Profiles ...106 Display ...109 Audio...111...
  • Page 13 5. Care and Maintenance ... 121 6. Troubleshooting... 122 Table of Contents...
  • Page 14 Table of Contents...

  • Page 15: Preparing Your Phone For Use

    Preparing Your Phone For Use Inserting Your SIM Card Slide the entire SIM card into the slot in the direction of arrow shown on the compartment, with the metal contacts of the SIM card facing down and the cut corner at the top left. SIM card A SIM card can be easily damaged if its metal contacts become scratched.

  • Page 16: Installing The Battery

    Installing the Battery 1. Place the battery onto the back of the phone, with the battery's contacts facing downwards and the tab on its top edge in alignment with the holes in the battery compartment. 2. Push the battery against the top of the compartment and press it down to click it into the compartment.

  • Page 17: Charging The Phone

    Charging the Phone 1. Insert the charger connector into the charger socket at the bottom right of your phone. Make sure that the connector is inserted in the right direction. Charger socket Charger connector 2. Plug the charger into a power outlet. 3.

  • Page 18: Turning The Phone On

    Turning the Phone On 1. Long press to turn the phone on. The phone will display the welcome animation. • You can select and set a welcome animation, image, or message that will display when you turn on your phone, as well as the music that will be played.
  • Page 19 3. When the PIN code entered has been accepted, the phone will automatically search for the designated network. This search process may take a few seconds. 4. The standby screen will be displayed, as well as network signal strength and the name of the network operator. You can now use the phone.

  • Page 20: Getting To Know Your Phone

    Getting to Know Your Phone Your Phone at a Glance The figure below shows the main parts of your phone: Front view 1 Earpiece OK key Left soft key Dial/Answer key Microphone Getting to Know Your Phone LCD display Right soft key Scroll key Power on/off key Alphanumeric keys...
  • Page 21 Bottom and back views Hands-free headset/ Data cable jack Wrist strap hole Mirror used to take a self portrait Camera lens Buzzer Battery compartment SIM card holder To avoid exceeding the FCC RF exposure limits, please do not wear the phone in front of your chest. Charger socket Battery Contacts Back cover...

  • Page 22: Standby Screen

    Standby Screen Main Screen Status bar Time and date Soft key bar Press enter the Phone Book Getting to Know Your Phone Press to enter Press camera function. the main menu. Name of network operator Wallpaper to use the...

  • Page 23: Icons In The Lcd Display's Status Bar

    Icons in the LCD display's Status Bar • You can set the animation or image you wish to use as wallpaper when the phone is in standby mode by going to the menu Media Center → Album. Alternatively, you can go to the menu Settings →...
  • Page 24 Icon Function Battery status GPRS network Message WAP message Voicemail Alarm Line in use Vibrate Getting to Know Your Phone Description Shows the current level of battery power. The more bars indicated, the more power that remains. Four bars: fully charged. No bars: immediate charging needed.
  • Page 25 Icon Function Normal Meeting Outdoors Personal Handsfree Divert Roaming Description Shows that the Normal profile is in use. To set the operating mode, go to the menu Settings → Profiles. See page 106. Shows that the Meeting profile is in use. Shows that the Outdoors profile is in use.

  • Page 26: Using The Keys In The Standby Mode

    Using the Keys in the Standby Mode In this user manual, "long-press" means to press and hold down a key for about two seconds before release. "Press" means to press a key and release immediately. The chart below is meant only to introduce the commands accessible with keys when the phone is in standby mode.
  • Page 27 Left soft key • Press to access the Phone Book (when Names is shown). • Press to save the phone number keyed in from the standby screen to the Phone Book (when Save is shown). Right soft key • Press this key to use the camera function (when Camera is shown).

  • Page 28: Alphanumeric Keys

    # key • Press to enter "#". • For extensions: After entering a phone number, long- press to enter a "P" and then enter the extension number. • Long press this key to lock the keypad. Alphanumeric keys • Press to enter digits in a phone number. •...

  • Page 29: Menu Navigation

    Menu Navigation When the phone is in standby mode, press menu and highlight the first item in that menu: Phone Book. For details on how to use the various functions listed in the menu, see page 70, "Menus". Main menu The main menu item to which you have scrolled will...
  • Page 30 Sub-menus The name of the current menu. Press enter the highlighted menu item for editing. Press represented by highlighted item or to activate the highlighted function. Press or down to an item. Pop-up menus Press to enter the highlighted item activate function represented by the item.

  • Page 31: Menu Navigation Example

    Menu navigation example The example given below demonstrates how to use menus to change the language setting. Regular access 1.In the standby mode, press or to open the main menu. 2.In the main menu, press to scroll to the Settings menu icon.
  • Page 32 4.Press to scroll to the language you wish to use. Then press to confirm your selection. If, for example, you wish to set English as the display language, scroll to highlight English, and then press . The display will automatically return to the Settings menu, displayed in English.
  • Page 33 Access through number shortcuts 1.In the standby mode, press or to bring up the main menu. 2.The location of items in the main menu corresponds to the position of the keys in the alphanumeric keypad. Thus, pressing will bring up the Settings menu.
  • Page 34 4.Press to scroll to the language you wish to use. Then press to confirm your selection. If, for example, you wish to set English as the display language, scroll to highlight English, and then press . The display will automatically return to the Settings menu, displayed in English.

  • Page 35: Main Menu Map

    Main menu map Phone book Call Records Messages Game Cherry Boy Eda Mouse Camera Media Center Tools Oper. Service WAP Service Settings Missed Calls Received Calls Dialed Calls Cleanup All Call Duration Call Cost SMS Chat Voicemail Cell Broadbast Memory Status Album Image Melody...

  • Page 36: Using Your Phone

    Using Your Phone Making a Phone Call To make a phone call, check your phone is powered on showing the idle screen. Enter the desired number using the alphanumeric keys . Press to dial your call. During a call, you can use the options. See page 35, "In-Call Menu". To modify a phone number that you have entered, press delete individual digits.

  • Page 37: Answering A Phone Call

    Answering a Phone Call When a call is received, your phone rings or vibrates, with the display showing the caller's number (if supported by your network vendor). If the caller is a contact stored in the Phone Book, the phone will show the name recorded in the Phone Book.

  • Page 38: Making An Emergency Call

    Making an Emergency Call To call emergency services, enter 112 (the international emergency number) and then press emergency call even if your phone is locked or cannot access your network, or there is no SIM card inserted, so long as you are within range of a network of the type supported by your phone.

  • Page 39: Listening To Voicemails

    Listening to Voicemails When your voicemail inbox contains new messages, your network vendor will send you a text message to inform you of a new voicemail message (if the network vendor supports it, the voicemail icon appear on the LCD display). There are two ways to access and listen to voicemail: 1.

  • Page 40: Phone Book

    Phone Book Adding Contacts to the Phone Book The Phone Book will have different formats and data headings depending on whether you have chosen to use a phone book stored on your SIM card or in your phone's memory. The phone book in your phone's memory can store up to 500 contacts.
  • Page 41 If you do not wish to save a modified Phone Book record, press (Back) to abort. You can also add a new contact by going to the menu Phone Book → Add. • The default data fields for a contact are as follows: The contact's name.
  • Page 42 • In addition to the contact data fields described above, you can also add the data fields listed below by pressing selecting Add New Field. The contact's mobile phone number. The contact's home phone number. The contact's office phone number. Other phone number for the contact.

  • Page 43: Sim Card Phone Book

    SIM Card Phone Book In the standby mode, press (Option), select Add. The Add function will prompt you to select from To SIM or To Phone. Select To SIM here to add a contact to your SIM card. The data fields provided by a SIM card phone book are as follows: The contact's name.

  • Page 44: Finding Contacts In The Phone Book

    Finding Contacts in the Phone Book In the standby mode, press display contacts stored in the Phone Book. There are two ways to locate a specific contact in the Phone Book: • Press to scroll through the names (listed in alphabetical order) until the one you want is highlighted.
  • Page 45 Copy to SIM (Phone): If you are currently using a phone book stored in the phone's memory, you can copy the contact's data to the phone book stored on your SIM card. Conversely, if you are currently using a phone book stored on your SIM card, you can copy the contact's data to the phone book stored in the phone's memory.

  • Page 46: Last Missed, Dialed, And Received Calls

    • Copy to SIM (Phone): If you are currently using a phone book stored in the phone's memory, you can copy the contact's data to the phone book stored on your SIM card. Conversely, if you are currently using a phone book stored on your SIM card, you can copy the contact's data to the phone book stored in the phone's memory.
  • Page 47 The icon will appear beside missed calls; the icon appear beside dialed calls; the calls. If a phone number has already been stored in the information for a contact in the Phone Book, the display will show the name of this contact.

  • Page 48: Operations During A Call

    Operations During a Call The following options marked with an asterisk (*) are dependent on network support and may require a subscription. Mute Press (Mute) to turn off the microphone. The person on the other end of the line will not be able to hear your voice. To restore the microphone's function, press Putting a Call on Hold* 1.

  • Page 49: In-Call Menu

    Call Waiting* If there is an incoming call while you are on the phone, a tone will sound through the earpiece and the display will show that a second call is currently waiting. You can handle the waiting call and currently active call in the following ways: 1.

  • Page 50: Send Dtmf

    Call Records Allows you to view information on missed, received, and dialed calls. See page 32, "Last Missed, Dialed, and Received Calls". Conference* Conference calls allow you to converse with more than one party at a time. The conference menu contains the following options: The maximum number of parties that can be accommodated during a conference call depends on the particular service provided by a network vendor.

  • Page 51: End Call

    Enter the phone number and then press End Call End All Ends all calls, whether active or on hold. End Active Ends only the active call. End Hold Ends only a call or calls on hold. End One Ends only a single call. Hold/Unhold/Swap Toggles the call status.

  • Page 52: Using The Silent Profile

    Using the Silent Profile From the standby screen, you can long-press profile. Once it is activated, the phone will alert you to an incoming call by vibrating with no ring tone. • When you long-press will vibrate for one second. The icon display's status bar to remind you that your phone is currently using the Silent profile.

  • Page 53: Camera Function

    Camera Function You can take photos using your phone's embedded camera, and then set photos as wallpapers for the LCD display's standby screen, or send them to others through MMS. 1. From the standby screen, press the view finder. 2. Press (Option) to make the following settings for the camera: •...
  • Page 54 Scene was set to Automatic. Scene was set to Indoors. Scene was set to Outdoors. Scene was set to Night. One filled star indicates that Low resolution was chosen. Two filled stars indicate that Medium resolution was chosen. Three filled stars indicate that High resolution was chosen. You can also use the camera by going to the menu: Camera.
  • Page 55 (Save) to save this photo to Media Center 5. Press take another photo simply press After you have saved a photo to the phone, you can manage this photo using the options below: • Send Photo: Sends the picture in a MMS message. For information about messaging features, see page 46, "Messages Menu".

  • Page 56: Shortcuts Menu

    Shortcuts Menu You can use the Shortcuts menu to assign 8 alphanumeric keys as shortcuts to commonly used functions or frequently dialed numbers. The number 1 key has been assigned to voicemail dialing and you are not allowed to change it. Entering the Shortcuts Menu From the standby screen, press Shortcuts menu.
  • Page 57 3. From the Add Function menu, press select the function to be represented by the shortcut key Alternatively, you can press a corresponding alphanumeric key to select the function you want. The functions listed in the Add Function menu are selected from various other menus. For details on these functions, see page 70, "Menus".

  • Page 58: Setting Phone Number Shortcuts

    Setting Phone Number Shortcuts 1. The method for setting a phone number shortcut key is largely the same as for a function shortcut key. After selecting the shortcut key, press (Option) to bring up a pop-up menu. After selecting Add Phone, press 2.

  • Page 59: Using Function And Phone Number Shortcuts

    5. Repeat the above step to add or modify a phone number shortcut. Different categories of phone numbers will be represented by different phone number shortcut icons. Using Function and Phone Number Shortcuts There are two ways to use shortcuts: 1.

  • Page 60: Messages Menu

    Messages Menu Your phone supports various messaging services including SMS (Short Messaging Service) and MMS (Multimedia Messaging service). SMS allows you to insert simple animations and ring tones into your short messages, while MMS enables you to send photos, colored images and music through your phone.

  • Page 61: Sms

    Editing and Sending a New Short Message 1. Go to menu: SMS > editor so you can write a new short message. Use the alphanumeric keys to enter text. For information on how to use the input methods provided by the phone for writing messages, see page 64, "Input Modes".
  • Page 62 Image: You can select an animation from the image library to insert into your message. Press to insert, press insert the image. Melody: You can select a ring tone from the melody library to insert into your message. Scroll to ring tone you desire, and then press inserted ring tone will be displayed as musical note within the message's text.
  • Page 63 number editor. c. Press When the phone is sending a message, "Sending... x/x" will appear on the upper screen. For example, if you are sending a message to three people, "Sending... 1/3" will appear when it is sending the message to the first recipient, and "Sending... 2/3" will appear when it is sending to the second recipient, and "Sending...

  • Page 64: Managing Drafts

    • Save the phone number from which the message was sent (the number shown on the display in the "Sender Info" item) to the Phone Book. • Save the phone number displayed in the message's contents. (the option for a directly displayed number). •...
  • Page 65 • Press (Option) to delete the draft or to delete all. • Press to edit the contents of the message. Using the SMS Templates > Go to menu: SMS templates in this menu to compose a message without having to enter the entire text character by character.
  • Page 66 Enter the message number provided by the network vendor. After you are finished, press Bearer Mode This can be set according to whether you are using a GPRS network system or a regular GSM dialup network. If you are using a GPRS network, you can use both the GPRS and dialup network to send and receive SMS messages.
  • Page 67 After activating this function, the network vendor will report to you when a message has been delivered. Direct Reply You can request that your reply to an SMS be sent directly through the sender's message center. Using Your Phone...

  • Page 68: Mms

    Before you start to use MMS, you have to subscribe to both GPRS and MMS services provided by your operator. Then you have to adjust MMS settings in your phone to be able to use MMS. Because MMS uses your operator's MMS server on a GPRS network to send messages to phones, you need to adjust the following settings correctly in order to use MMS: Go to menu: Oper.Service >...
  • Page 69 c. Press • Subject : press • : press Content on the options of editing the content. • Cc : You can send the message as a carbon copy to others. • Bcc : You can send the message as a confidential carbon copy to others.
  • Page 70 the highlighted photo. Press previous photo. Press slide. Templates: Insert the default MMS templates into your messages. Those templates contain images and text. You can customize those by inserting more objects you like. Image: You can select a image saved in the image library to insert into a MMS slide.
  • Page 71 • Slide Duration : To set the duration of each slide during playing. For example, 30 means each slide will played for 30 seconds. Each slide allows only one image and one audio file. If you try to insert a second image or audio, an pop up.
  • Page 72 Cleaning Up Messages > Go to menu: MMS Cleanup. This option allows you to cleanup part of or all of the messages. The options for cleanup includes All, Inbox, All Read, Outbox, and Drafts. Settings Before you start to use MMS, go to menu: MMS > Settings to adjust the following settings: Filter Your phone will reject all MMS messages from the senders...

  • Page 73: Sms Chat

    Deferred Download After you activate this function, the phone will only download the information associated with the sender when it receives an MMS message. You can then decide whether to download this message's content after you have read the information related to the sender.
  • Page 74 your nickname followed by your message as “nickname> message”. d.When the chat message is sent, press choose Send to enter another message. The message will automatically be sent to the same recipient. Repeat the same process to send more messages to the same person. 2.

  • Page 75: Voicemail

    Leaving a chat session If you want to leave a chat session, press will take you back to the SMS Chat menu. You phone will keep the records of the last chat session. To resume the previous chat session, scroll to select Previous Chat. If you want to start a new chat, go to: SMS Chat →...

  • Page 76: Cell Broadcast

    Cell Broadcast Cell broadcast messages are general messages that your network operator broadcasts to all phones within a particular area. These messages are broadcast in numbered channels. For example, channel 030 might be for local weather, 060 for traffic reports, 080 for information about local hospitals, taxis, pharmacies, and so forth.

  • Page 77: Memory Status

    Memory Status Displays the amount of remaining available memory, including pictures, animations and ring tones stored on the phone. Using Your Phone...

  • Page 78: Input Modes

    Input Modes Changing the Text Input Mode When the display shows the editing screen, you will be able to see the name of the current text input mode in the upper right corner of the screen. Press to change the input mode. The input mode icons (names) that may appear in the upper right corner of the screen represent the following input modes: Uppercase letters input mode.

  • Page 79: Letter Input Mode (Abc)

    Letter Input Mode (ABC) In this mode, press the key containing the desired letter repeatedly to scroll through the available characters in order until it is reached. How to use the letter input mode • You must press the key corresponding to the desired letter the correct number of times in order to enter the letter you want.
  • Page 80 How to use iTap • Press once the alphanumeric key corresponding to the first letter of the word you wish to enter without considering where that letter falls in the sequence of characters available through that key. Then press the key corresponding to the second letter, and so forth. The phone will predict which word you wish to enter based on the set of keys you have pressed.

  • Page 81: Symbol Input Mode

    5. Since "GOOD" is not the word that you wish to enter, press display the next candidate word, "HOME". 6. Press to place "HOME" into the message. Symbol Input Mode When editing messages, press to open the symbols field along the bottom of the screen.

  • Page 82: Direct Connection To Urls

    Direct Connection to URLs Your phone provides handy preset URL text hotkeys, enabling you to enter a complete URL more quickly and conveniently, and making Internet access more efficient and enjoyable. From the standby screen, you can rapidly key in numerical URLs. If, for example, you wish to enter "http://123.com"...
  • Page 83 • After you press to enter "http://" press For example, if after you enter "123" and then press "http://123.com" to appear on the screen-you press URL will change to "http://123.com/". Pressing switch between "/" and "-". • When the screen shows the desired URL, press Internet and access this URL address.

  • Page 84: Menus

    Menus The phone's menus provide various features. The main menu consists of 9 icons. Each icon represents a particular menu item, which is used to access related sub-menus. For information about navigating menus, see page 15, "Menu Navigation". Phone Book This menu provides various functions for managing the Phone Book, including the ability to add, locate, and copy contact data;...

  • Page 85: Edit

    Edit After selecting a particular contact, you can follow the procedure described on page 26 for editing the data for this contact. Copy If you are using the phone book stored in the phone's memory, you can copy contact data to the SIM card's phone book, and vice versa. You can select a contact to copy from one phone book to the other, and copy all contacts in one phone book to the other by choosing the option All Phone to SIM (All SIM to Phone).

  • Page 86: Business Card

    • Press : Allows you to view a list of all contacts that belong to the caller group. Press then press (Option) to access the following options: Add: Add a contact to the caller group. Press contact to add, and when finished press Delete: Deletes the selected contact from the contact group.

  • Page 87: My Number

    My Number This option allows you to save your SIM card number and name to your SIM card's memory. Press (Option) and select Add to enter your name and number. When you are finished, press (Option) and then select Save to save your data.

  • Page 88: Call Records

    Call Records Your network operator must support this feature in order for you to be able to use it. This menu includes a list of your missed calls, dialed calls, and received calls. Call costs and time are also recorded. Missed Calls Shows your most recent missed calls.

  • Page 89: Call Cost

    Last Call Time Shows the duration of the last call. All Calls Time Shows the total time for all calls. Received Calls Time Shows the total time for all received calls. Dialed Calls Time Shows the total time for all dialed calls. Reset Clears all call time records.

  • Page 90: Messages

    Requires the support of the network operator. Reset Clears all call cost records. Requires entry of the PIN2 code. Call Cost Limit Shows the current limit set for total call costs. Set Call Cost Allows you to first enter the unit price and a currency for calculating call costs.

  • Page 91: Games

    Games Your phone provides a number of exciting games that you can use to entertain yourself when you have a spare moment. Games Cherry Boy This game contains five levels and in each level the player has three lives. To pass one level you must collect all the cherries before time is up, or you must obtain the key to the next level.
  • Page 92 Game controls Press Press a ladder. Press Press split will be reconnected in 5 seconds. Menus to move the player left or right. to move the player up or down on to pause the game. to split the path so the monkey will fall. The...

  • Page 93: Eda Mouse

    Eda Mouse This game contains eight levels and to pass each level player has to eliminate the fruit to a certain amount. You pass one level when your score has reached a thousand points. To eliminate the fruit, player has to arrange three identical fruit in a row. You lose the game when the fruit reach the eda mouse's head.

  • Page 94: Camera

    Camera The digital camera function you access through the main menu is the same as pressing (Camera) from the standby screen. For details on how to use the camera to take photos, see page 39, "Camera Function". Media Center Album This album stores the phone's default pictures, as well as images received in MMS messages, or photos taken using the camera on the phone.

  • Page 95: Image

    Set Image ID: Set the current selected photo as a phone book contact's visual caller ID. When there is an incoming call from that contact, the phone's display will show this photo. • New Entry: Enables you to create a new contact in the Phone Book using the photo as her/his caller ID.

  • Page 96: Melody

    Melody This ring tone library includes the phone's default ring tones, as well as ring tones received in messages, or downloaded through WAP services or using multimedia communications tools. The phone supports the following music file formats: MIDI, SMAF, and iMelody. Scroll to the desired ring tone, and press following tasks with the ring tone: Set Ring ID: Set the current selected ringtone for a contact.

  • Page 97: Cleanup All

    • Details: Displays the name of the ring tone, its file size, and whether it is a default ring tone, or a file that you have saved or downloaded yourself (noted as User Defined). Cleanup All Deletes all the data stored in the media center. Memory Status Displays the amount of remaining available memory, including photos, images, and ring tones stored on the phone.

  • Page 98: Tools

    Tools Alarm If you activate the Alarm Clock feature, when the specified date and time arrive, the phone will sound the alarm, even if your phone is turned off. 1. Select the alarm you wish to set and press 2. The status of the alarm will appear, press on or off.

  • Page 99: World Clock

    4. Lastly, you must press settings. After completing Alarm settings, standby screen's status bar. World Clock If during travel, you move between time zones, the phone will automatically adjust the time displayed on the screen based on the time zone prompts provided by the local network operator so that you always have access to accurate local time.

  • Page 100: Calendar

    Calendar You can use the Calendar to set up memos for forthcoming events such as a meeting, an appointment, or a friend's birthday. The Calendar will also remind you about events you have previously scheduled. 1. When you open the Calendar, the phone will show the calendar for the current date.

  • Page 101: Shortcuts

    Enter the end date of the event. Enter an end time of the event. This option allows you to set the time you want the reminder to remind you about the event. For example, if you want the reminder to sound 30 minutes before the meeting, chose 30 minutes to set the reminder to do so.

  • Page 102: Calculator

    Calculator Allows you to use the phone as a calculator. Use to perform mathematical operations shown on the screen. You can enter numbers up to a maximum of 8 digits in length. Currency Converter Below is a description of the Currency Converter screen: 1.

  • Page 103: Stopwatch

    3. After returning to the Currency Converter screen, you can select one of the currencies and then enter an amount that you wish to convert into the other currency. You can enter amounts up to six digits long. 4. After pressing the converted amount will appear in the field for the other currency.

  • Page 104: Oper. Service

    Oper. Service Your phone includes a built-in WAP browser, allowing you to use the phone for mobile Internet connectivity. You can browse the online services offered by the network operator or ISP, such as information on financial news, sports, travel, and entertainment. To use the phone to get online, necessary WAP and GPRS settings must be made in this menu.
  • Page 105 Start Browser Starts up the browser and connects to the homepage. Browsing a webpage Referring to the soft key commands at the bottom of the screen, press webpage. Press to scroll up or down a webpage. For details on browsing a webpage, inquire with the network operator providing WAP services.
  • Page 106 Home Returns to the home page. To designate a particular page to be your home page, go to 9 Settings Exit Closes the browser and returns you to the main menu screen. Inbox When your phone receives a message that can only be viewed using a WAP browser, you enter this WAP inbox to read the message.
  • Page 107 Move to Folder: Moves a bookmark to the designated folder. Delete All: Deletes all bookmarks and book-marks folders. Hotkeys: Allows you set a numerical key as a hotkey for a bookmark. After completing the setting, you can press this numerical key to directly link to the webpage represented by the bookmark.
  • Page 108 Homepage Designates a homepage. When you start up the WAP browser or if you select Home from the browser's menu, the screen will display the homepage you designate. a. Press webpage that you wish to use as your homepage. (Some WAP service providers do not allow users to set a homepage.) b.
  • Page 109 Set Proxy Your phone can save the settings for six WAP proxy servers. You can select one of these proxy settings for use as a default so that your phone will connect to that proxy server when you begin an Internet session. You can also go to the menu Oper.
  • Page 110 Authentication You can decide whether your phone should store your user name and passwords for websites that require them. If you allow your phone to authenticate you automatically, you will not need to re-enter your user name and password each time you visit the same website.
  • Page 111 WAP Message When you receive a new WAP message, the status bar will show the Starts up icon to remind you that you have an unread WAP message. the browser and displays the WAP inbox so you can read WAP messages.
  • Page 112 By scrolling to a particular group of WAP server settings that you wish to modify, and then pressing new group of settings, edit the settings, or delete the settings. WAP server settings include the fields listed below. Press (Edit) to edit the setting in each field. When you are finished with the settings for all fields, you must press group of WAP server settings to be saved.
  • Page 113 CSD/GPRS: Use the dialup network preferentially. Only if there is no dialup network will the GPRS network be used. CSD: Use only the dialup network. A dialup network is a GSM Circuit Switch Data Service (CSD for short). Using a dialup network can be likened to using a home computer's modem, in that before connecting to the Internet a number must be dialed.
  • Page 114 Line Type: This is the type of dialup connection. Press to select. Baud Rate: The default value is 9600, which is the standard speed for data connections with a GSM mobile phone. Auth Type: telecommunications protocol authentication. Save Items When viewing a webpage, if you discover that it contains an image that can be downloaded, you can access this option to save the image to your phone.
  • Page 115 b. Select the Save option to designate the URL you entered as your homepage. Select Use Default to use the homepage designated by your WAP service provider. Scroll Mode You can select two scrolling modes: Block or Smooth. In the Block mode, as many words as will fit in a line are shown for a few seconds, then the next line is shown, and so on.
  • Page 116 Circuit Prompt The Circuit Prompt is a message displayed before each circuit data call is made. It reads, "Circuit is down. Start a data call?" You can choose to enable or disable this feature. Security Secure Prompt The Secure Prompt message is displayed before you leave a secure area.
  • Page 117 Advanced Restart Browser Restarts the browser, and automatically returns to the designated homepage. This feature is provided for your convenience if network errors occur, allowing you to restart the browser and re-establish your Internet connection. Downloads If this option is enabled, you will not be able to download images, background audio, and objects.

  • Page 118: Stk

    Your network operator provides this STK (SIM Tool Kit) menu. Depending on your SIM card and the services provided, there will be several extra options under this menu. However, if your network operator does not offer STK services, this menu will not appear on the screen. For details, please contact your operator.

  • Page 119: Settings

    Settings Date & Time Used to set the time and date, as well as the format in which the time and date will be displayed on the startup screen. Press settings. Date Enter the date using appropriate number keys. Time Enter time using appropriate number keys.

  • Page 120: Profiles

    Power Off When you see Status Off displays on the screen, press choose the On option, scroll to Time and then enter a time you wish the phone to be auto turned off. Profiles A profile is a group of settings that determine whether the phone will alert you to incoming calls through a ring tone or a vibrating alert, and how ring tones in general are used on the phone.
  • Page 121 Outdoors The options in this profile have been preset to suit an outdoor activity (for example, use of the highest ring tone volume, activation of both ring tone and vibrating alerts, and use of keypad tones). Once this profile is activated, the LCD display's status bar will show the Handsfree This profile is only active when a hands-free kit is attached to...
  • Page 122 • Ring Only: When there is an incoming call, the phone will use a ring tone but no vibrating alert. • Vibrate Only: When there is an incoming call, the phone will use a vibrating alert but no ring tone. •...

  • Page 123: Display

    • Any Key: Allows any key except incoming call. In this mode, incoming call, and not to answer. • Automatic: If the Automatic answer mode is activated, the phone will ring for five seconds, and then the incoming call will be automatically answered (only the Handsfree profile allows this setting).
  • Page 124 • Image: Press image selected in this option will be displayed when the phone is turned on. After selecting an image, you will need to select the desired music to be played when the phone is turned on. Select Silent if you do not wish any music to be played. •...

  • Page 125: Audio

    Audio This menu allows you to set various sounds that the phone uses. Some of the options provided in this menu and the Profiles menu are identical (for example, Call Ring). Therefore the particular setting that the phone uses will depend on which menu you last used to make the setting.

  • Page 126: Call Divert

    Off: Your phone number will not be shown on the recipient's phone. If this feature is turned off, you may not be able to make phone calls in certain countries, such as Singapore and China. Preset: Whether your phone number will be displayed on a recipient's phone will be determined by the default set by the network operator.
  • Page 127 Call Barring You can request that your network operator block the dialing or receiving of certain calls. The call barring services below require the support of your network operator. To activate or cancel any of the options below, you must enter the network password provided by the network operator.
  • Page 128 Call Waiting If there is an incoming call when you are in the middle of another call, the screen will display the number of the incoming call and call waiting message to alert you. You can activate, cancel, or view the status of this feature from this menu.

  • Page 129: Network

    Active Line This feature allows you to use two different phone numbers on one phone. You can designate one number for dialing calls, while accepting incoming calls dialed to both numbers without needing to use two phones. Select either Line 1 or Line 2. The number you select ( ) will appear on the standby screen.
  • Page 130 your regular network in your home country or when abroad, you can manually select the local network system. Your network operator must be able to support network selection in order for you to use this feature. Network Mode You can choose whether the network selection mode that the phone will use when it is turned on is automatic or manual.

  • Page 131: Security

    Service Tone Used to set whether the phone will sound when it detects an available network. Security You can use a PIN code, phone password, and SIM card lock authentication to prevent unauthorized use of the phone. PIN Code A PIN (Personal Identification Number) code is a password provided by a network operator.
  • Page 132 Phone Lock Activates/deactivates or changes the phone's startup password. The startup password prevents unauthorized persons from using your phone. Once the phone's password is activated, the phone will be locked down when it is turned on unless this password is correctly entered.

  • Page 133: Power Saving Mode

    Before setting the SIM Lock feature, you must enter the previously set SIM Lock password (the default SIM Lock password is 1234). The password must be between 4 and 8 digits in length. Screen Lock Used to create a security screensaver. When you have not performed any tasks with the phone for a set period of time, the phone will automatically activate the screensaver shown on the right.

  • Page 134: Input

    Input You can set the default input mode that will be automatically activated whenever you open the editing window for entering information into a message, the Phone Book, and so forth. Restore Restores all of the phone's settings to their factory defaults. Menus...

  • Page 135: Care And Maintenance

    Care and Maintenance Take note of the points noted below to ensure that you are using the phone properly and to extend the lifespan of the phone. • Store the phone and its accessories out of the reach of children. •...

  • Page 136: Troubleshooting

    Troubleshooting If you encounter problems while using the phone, or if it performs erratically, you can consult the information in the chart below. If your particular problem cannot be resolved using the information in the chart, contact the dealer where you purchased the phone. Problem Possible cause •...
  • Page 137 Problem Possible cause • The standby time is related to your network operator's system configuration. The same phone used with different network operators' systems will not provide exactly the same length of standby time. • The battery is depleted. In Shortened high-temperature standby time...
  • Page 138 Problem Possible cause • SIM card invalid. Unable to • You are not within the connect to the network's service area. network. • Poor signal. • You cannot You have activated the answer Call Barring feature. incoming calls. • You have activated the Call Barring feature.
  • Page 139 Problem Possible cause • Unable to The Phone Book's enter memory is already full. information into the Phone Book. • Your network Unable to does not support these select certain features, or you have not applied for services that features. provide these features.
  • Page 140 Troubleshooting...

Table of Contents