Protection Settings; Pin Code; Phone Protection; Restoring Factory Settings - Maxcom MM720BB Operating Manual

14.6 Security settings

14.6.1 PIN code

You can enable/disable PIN number request at switching
the phone on, and change the PIN code
14.6.2 Phone Security
You can enable phone locking. When switching the phone
on, you need to enter the lock code. Default code is 0000.

14.7 Restoring Factory Settings

With this option, you can restore the factory settings.
Select from the MENU:
Settings->Restore factory settings, and then enter security
password. Finally, confirm by pressing the green receiver.
Warning: The default security password is: 0000

15. Connecting to a Computer

You can connect the phone to a computer by means of a
USB cable, so you can copy and transfer files between the
phone and the computer
Connecting:
-Insert the USB plug to the phone
-Connect the second cable end to the port in the computer
54