N Release/J/Image Stabilizer; O Release/J/Image Stabilizer - Olympus IM002 Instruction Manual

N Release/j/Image Stabilizer

Option
Rls Priority S
Rls Priority C
jL Settings
jH Settings

O Release/j/Image Stabilizer

4
Option
K Image
Stabilizer
j Image
Stabilization
Half Way Rls
With IS
Lens I.S. Priority
114 EN
If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF and C-AF modes (P. 43, 51).
You can select from [j], [♦j], [♥j], and [0] for the
sequential shooting speed and shot limit. You can set the
pre-shutter frames for [0]. Figures for sequential shooting
speed are the approximate maximums.
Sets image stabilization for still image shooting.
Sets the priority function during sequential shooting.
[Fps Priority]: Shooting speed gets priority over image
stabilization. The sensor will not be reset to the center
during sequential shooting.
[IS Priority]: Image stabilization gets priority over shooting
speed. The sensor will be reset to the center per frame of
sequential shooting. The shooting speed will drop slightly.
When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
If [On] is selected, priority is given to the lens function
operation when using a lens with an image stabilization
function.
• This option has no effect on lenses that are equipped with
an image stabilization switch.
Description
Description
G N
MENU
g
—
48
G O
MENU
g
53
—
—
—