S Button/Dial; T Release/J/Image Stabilizer - Olympus E-PL8 Instruction Manual

S Button/Dial

Option
Button Function
Dial Function
Dial Direction
Mode Dial
Function

T Release/j/Image Stabilizer

Option
Rls Priority S
Rls Priority C
j L fps
j H fps
j Image
Stabilization
Half Way Rls With
IS
Lens I.S. Priority
Release Lag-Time
* This will shorten the battery life. Also make sure that the camera is not subject to sharp
impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If
this happens, turn the power off and on again.
Choose the function assigned to the selected button.
[FFunction], [UFunction], [RFunction], [IFunction],
[GFunction], [nFunction], [lFunction]
You can change the function of the control dial (P).
P F / %
A Aperture value / F
S Shutter speed / F
M
Shutter speed / Aperture value
q
[Prev/Next] / [G / Magnify]
In P, A, S, and M modes, the roles played before and after
F button is pressed are reversed.
Choose the direction in which the dial is rotated to adjust
shutter speed or aperture. Change the program shift direction.
You can assign registered Myset settings to any position on
the mode dial.
If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 49) and C-AF (P. 49) modes.
Choose the frame advance rates for [S] and [T]. Figures
are the approximate maximums.
Activates/deactivates image stabilization for continuous
shooting.
When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
If [On] is selected, priority is given to the lens function operation
when using a lens with an image stabilization function.
• This option has no effect on lenses that are equipped with
an image stabilization switch.
If [Short] is selected, the time lag between fully pressing the
shutter button and the shot being taken can be shortened.*
Description
Description
S
c
MENU
g
98
—
—
—
T
c
MENU
g
—
54
—
—
—
—
4
EN 89