Page 2
4 hours using the charging base provided. See “Charging” for details. Hold your DermLite DL3N so that the LEDs are aimed in the direction of the lesion to be examined. Place the device approximately 1” (~25mm) from the skin.
Page 3
Set the base on a level surface. Place the DermLite onto the base, and the “3” will illuminate red to indicate that the DermLite DL3N is being charged. When the lithium battery is fully charged and either in its base or outside its base and powered on, the “3”...
Need help?
Do you have a question about the DL3N and is the answer not in the manual?
Questions and answers