Setting The Alarm Clock; Using Several Handsets; Registering Handsets; Register Handset - Gigaset C610A User Manual

Setting the alarm clock

Setting the alarm clock
Precondition: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
É
¢ ¢
v
Alarm Clock
¤
Change multiple line input:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
¼
In idle status, the
are displayed.
A wake-up call is signalled on the display
and with the selected ringtone (
The wake-up call sounds for 60 seconds. If
no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Precondition: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
58
page 16).
icon and wake-up time
¢
page 2).

Using several handsets

Registering handsets

You can register up to six handsets to your
base.
A Gigaset C610H handset can be registered
on up to four bases.
Manual registration of the
Gigaset C610H on Gigaset C610/
C610A
You must activate manual registration of the
handset (1) on both the handset (2) and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g. INT 1. If not, repeat
the procedure.
1) On the handset
The handset must not be registered to a
base.
§Register§
Press the display key.
The handset is already registered to a base:
Ï
¢ ¢
v
Registration
¢

Register Handset

If the handset is already registered on four
bases:
s
Select base, e.g. Base 3 and
§OK§
press
~
If required, enter the system
PIN for the base and press
A message displays that a search for a base
that is ready for registration is being carried
out.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
¢
( page 3) (approx. 3 seconds).
.
§OK§
.