Base settings
•
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset
u
Registration to the base
u
Date and time
u
Directory entries, the call lists, the SMS
lists
Ï
¢
¢
v
System
§Yes§
Press the display key.
Base settings
The base settings are carried out using a reg-
istered Gigaset C610H handset.
Changing the base ringtones
(Gigaset C610A only)
u
Volume:
You can choose between 6 volumes (0–5;
e.g. volume 3 = Š) and the "cre-
scendo" ringtone (6; volume increases
with each ring = ‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle status:
Ï
¢
¢
v
Audio Settings
¢
Ringtones (Base)
¤
Change multiple line input:
r
Set volume.
s
Scroll to the next line.
r
Set melody.
§Save§
Press the display key to save the
setting.
68
¢
Handset Reset
•
Activating/deactivating
music on hold
Ï
¢
¢
v
Audio Settings
¢
Music on hold
§Change§
Press
to activate or deactivate the
music on hold (³ = on).
•
Repeater support
With a repeater you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Precondition: A repeater is registered.
Ï
¢
¢
v
System
§Change§
Press
to deactivate repeater mode
(³= on).
Please note
Eco Mode / Eco Mode+ (
repeater support cancel each other out,
i.e. if you use a repeater you cannot use
Eco Mode and Eco Mode+.
¢
Repeater Mode
¢
page 57) and